From: Scott Wood <scottwood@freescale.com>
Date: Mon, 18 Jan 2010 14:32:59 -0600
Subject: [U-Boot] [PATCH 0/2] i.MX31: Activate NAND support for
	PDK	board.
In-Reply-To: <cover.1263746107.git.lilja.magnus@gmail.com>
References: <cover.1263746107.git.lilja.magnus@gmail.com>
Message-ID: <20100118203259.GB6490@loki.buserror.net>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Sun, Jan 17, 2010 at 05:46:09PM +0100, Magnus Lilja wrote:
> Hi all,
> 
> These patches applies on the previously submitted NAND patches
> for the i.MX31
> (http://lists.denx.de/pipermail/u-boot/2009-November/064213.html).
> 
> The patches (including the above mentioned patches), applies on
> the current U-boot tip.
> 
> The series add support for large page NAND, using the same layout
> as the latest Linux driver, for i.MX31 and finally activates
> general NAND support and specifically NAND environment for the 
> i.MX31 PDK board.
> 
> Magnus Lilja (2):
>   MXC: Add large page oob layout for i.MX31 NAND controller.
>   MX31: Activate NAND environment on i.MX31 PDK board.
> 
>  drivers/mtd/nand/mxc_nand.c |   12 ++++++++++++
>  include/configs/mx31pdk.h   |   25 +++++++++++++++++++++----
>  2 files changed, 33 insertions(+), 4 deletions(-)

Applied both patchsets.

-Scott