From: pavel@ucw.cz (Pavel Machek) Date: Sun, 31 Jan 2010 10:28:29 +0100 Subject: [PATCH] staging/dream: add missing include files/fix compilation In-Reply-To: <20100131084421.GG2238@elf.ucw.cz> References: <20091225205917.GA25761@elf.ucw.cz> <20100115002419.GA25643@kroah.com> <20100119054516.GB22153@elf.ucw.cz> <1263914079.1951.43.camel@m0nster> <20100131084421.GG2238@elf.ucw.cz> Message-ID: <20100131092829.GJ2238@elf.ucw.cz> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi! > > > > > This adds missing include files, so it should now compile. ifdef > > > > > guards were added to Kconfig, so it should not cause problems on > > > > > non-arch-msm machines. > > > > > > > > > > Signed-off-by: Pavel Machek > > > > > > > > Odd, this doesn't apply to the linux-next tree, some of the files are > > > > already there. > > > > > > Strange, it seems it is almost all already in. Well, good :-). > > > > > > But there's small problem. linux-next now contains dwalker's tree, and > > > I could not get it to compile, even with staging disabled. I'll need > > > to look into that. > > > > I worked on it a little, but I won't have time to really start cleaning > > up that tree till next week, or this weekend. > > > > I pushed a new tree for next that should compile for dream with the > > attached config. I also included the patch that I added to get it to > > compile (you'll need the machine types too which I didn't include). > > Thanks! I checked out linux-next version, and it seems to include > > > commit cdf6c137865357112aa31666b65b938ab29fa736 > > msm: compile fixes for dream. > > this patch. It still fails with: > > arch/arm/mach-msm/rpc_hsusb.c: In function 'msm_chg_rpc_connect': > arch/arm/mach-msm/rpc_hsusb.c:156: error: implicit declaration of > function 'machine_is_msm7201a_surf' > arch/arm/mach-msm/rpc_hsusb.c:156: error: implicit declaration of > function 'machine_is_msm7x27_surf' > arch/arm/mach-msm/rpc_hsusb.c:157: error: implicit declaration of > function 'machine_is_qsd8x50_surf' > make[1]: *** [arch/arm/mach-msm/rpc_hsusb.o] Error 1 > make: *** [arch/arm/mach-msm] Error 2 > > (and similar error further down). This fixes it, but you probably want > to add machine_is_* to your git. (Aha, is that what you meant by > "machine types"? > > With this patch it compiles. Ok, it compiles, but I do not see it booting. You config has: CONFIG_MSM_DEBUG_UART=3 # CONFIG_MSM_DEBUG_UART_NONE is not set # CONFIG_MSM_DEBUG_UART1 is not set # CONFIG_MSM_DEBUG_UART2 is not set CONFIG_MSM_DEBUG_UART3=y ... CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y set, so I'd expect it to say something on the serial line... (right? Or do I still need to patch printk.c to get that?). And I see nothing :-(. I'm using ./fastboot -c "console=ttyMSM2 root=/dev/mmcblk0p1 rootdelay=5 fbcon=rotate:1" boot /data/l/linux-dwalker/arch/arm/boot/zImage ...with different kernel, it works (as in "I get most of the boot on serial line; it will not actually mount root"). Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html