From: baruch@tkos.co.il (Baruch Siach) Date: Thu, 4 Feb 2010 20:34:26 +0200 Subject: [PATCH] Add USB support for i.MX27/35 and Phytec i.MX boards In-Reply-To: <1265295825-8705-1-git-send-email-s.hauer@pengutronix.de> References: <1265295825-8705-1-git-send-email-s.hauer@pengutronix.de> Message-ID: <20100204183426.GA30488@jasper.tkos.co.il> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Sascha, On Thu, Feb 04, 2010 at 04:03:37PM +0100, Sascha Hauer wrote: [snip] > arch/arm/mach-mx2/Kconfig | 2 + > arch/arm/mach-mx2/mach-pca100.c | 103 ++++ > arch/arm/mach-mx2/mach-pcm038.c | 22 + > arch/arm/mach-mx3/Kconfig | 2 + > arch/arm/mach-mx3/mach-pcm037.c | 137 ++++-- > arch/arm/mach-mx3/mach-pcm043.c | 53 ++ > arch/arm/mach-mx3/pcm037.c | 795 +++++++++++++++++++++++++++++ > arch/arm/mach-mx3/pcm043.c | 367 +++++++++++++ > arch/arm/plat-mxc/ehci.c | 118 ++++- > arch/arm/plat-mxc/include/mach/mxc_ehci.h | 4 + > drivers/usb/gadget/fsl_mx3_udc.c | 31 +- > 11 files changed, 1570 insertions(+), 64 deletions(-) > create mode 100644 arch/arm/mach-mx3/pcm037.c > create mode 100644 arch/arm/mach-mx3/pcm043.c Is the addition of these two files intended? baruch -- ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -