From: Wolfgang Denk Date: Sat, 06 Feb 2010 15:22:23 +0100 Subject: [U-Boot] Problem to link u-boot for sh2a 7203 In-Reply-To: <201002061124.41572.fabio.giovagnini@aurion-tech.com> References: <201002061124.41572.fabio.giovagnini@aurion-tech.com> Message-ID: <20100206142223.8D1E524F09@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Fabio Giovagnini, In message <201002061124.41572.fabio.giovagnini@aurion-tech.com> you wrote: > > I can compile u-boot for rsk7203_config. > But into the file board/renesas/rsk7203/config.mk > > TEXT_BASE = 0x0C7C0000 > > and if I read u-boot.srec that is the result of building process I see that > the address spce of the code is starting from 0x0C7C0000 > > On my board I have 32 bit SDRAM at such an address, and even if I could In this case your board is obviously not a Renesas rsk7203 board, which means you cannot use this configuration foir your hardware. > uxecute the program using an emulator initializing in place of me the BSC, > how can I flash at 0x00000000 (start address of NOR flash) my bootloader? > How can I link the loader so that I can flash the code into my NOR flash and > using a part of SDRAM I have to run the bootloader? You will have to port U-Boot to your hardware. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Our missions are peaceful -- not for conquest. When we do battle, it is only because we have no choice. -- Kirk, "The Squire of Gothos", stardate 2124.5