From: amit.kucheria@canonical.com (Amit Kucheria) Date: Tue, 9 Feb 2010 18:06:31 +0200 Subject: [PATCHv3 5/7] mxc: Add support for the Babbage board (i.MX5) In-Reply-To: <4B6C5519.2070506@gmail.com> References: <367110fafb57f7340bbffec9b394ed2fa6e89da5.1265385421.git.amit.kucheria@canonical.com> <553d86cf968ba78a26b67098c2e1849407a51ba1.1265385421.git.amit.kucheria@canonical.com> <7739120baf6088e426f3f8bab174f6c6a6df3601.1265385421.git.amit.kucheria@canonical.com> <4B6C5519.2070506@gmail.com> Message-ID: <20100209160631.GI3390@matterhorn.verdurent.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 10 Feb 05, Magnus Lilja wrote: > Amit Kucheria skrev: > > Babbage is a reference board from Freescale for their i.MX51 SoC. > > > > Add board definition, Kconfig and Makefiles to enable Freescale i.MX51 > > processor and Babbage board. > > > > Boot tested on a Babbage2.5 board > > In u-boot this board, and the files, are called mx51evk instead of Babbage. It would be nice if the same name is used in both, but no big issue. > > Regards, Magnus I started to do a patch to move it to EVK but then realised that arch/arm/tools/mach-types has it as mx51_babbage. So this would cause more confusion. I'll just add a comment in the Kconfig help. Regards, Amit -- ---------------------------------------------------------------------- Amit Kucheria, Kernel Engineer || amit.kucheria at canonical.com ----------------------------------------------------------------------