From: amit.kucheria@canonical.com (Amit Kucheria) Date: Wed, 10 Feb 2010 12:33:08 +0200 Subject: [PATCHv3 0/7] Initial Freescale i.MX51 SoC support In-Reply-To: <20100210101632.GM17643@pengutronix.de> References: <20100210101632.GM17643@pengutronix.de> Message-ID: <20100210103308.GD16615@matterhorn.verdurent.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 10 Feb 10, Sascha Hauer wrote: > Hi Amit, > > On Tue, Feb 09, 2010 at 06:59:48PM +0200, Amit Kucheria wrote: > > (patchset rebased on top of Sascha's tree and trivial fixes made) > > git://git.pengutronix.de/git/imx/linux-2.6.git mxc-master > > > > Will you consider merging it now? > > > > Regards, > > Amit > > > > This series of patches adds basic support for i.MX5 family to the kernel. This > > is just the bare minimum that brings up the board - sets up the clocks, IO > > with a serial port and timers. > > > > Features: > > > > * Console: Serial console using pre-existing drivers/serial/imx.c > > * Timer: Timer provided through arch/arm/plat-mxc/time.c > > * Interrupts: New interrupt controller through arch/arm/plat-mxc/tzic.c > > * Clocks: Minimal Clock framework to allow board boot up > > * Defconfigs: mx51_defconfig provided > > > > Tested on a i.MX51-based Babbage 2.5 board. > > > > Git: > > > > repo: git://kernel.ubuntu.com/amitk/mx51-upstream.git mx51-baseport > > ok, merged for -next. BTW the correct branch is mx51-baseport-sascha. > This shouldn't happen with the proper use of git request-pull. I'll keep that in mind for the next set. > Thanks for your work! Thanks Sascha and everyone else for the reviews. Regards, Amit -- ---------------------------------------------------------------------- Amit Kucheria, Kernel Engineer || amit.kucheria at canonical.com ----------------------------------------------------------------------