From: Tilman Schmidt Subject: [PATCH 1/4] gigaset: small documentation improvement Date: Tue, 23 Feb 2010 00:08:51 +0100 (CET) Message-ID: <20100221-patch-gigaset-01.tilman@imap.cc> References: <20100221-patch-gigaset-00.tilman@imap.cc> Cc: Hansjoerg Lipp , Karsten Keil , isdn4linux@listserv.isdn4linux.de, i4ldeveloper@listserv.isdn4linux.de, netdev@vger.kernel.org, linux-kernel@vger.kernel.org To: Karsten Keil , David Miller Return-path: In-Reply-To: <20100221-patch-gigaset-00.tilman@imap.cc> Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org From: Tilman Schmidt Subject: [PATCH 1/4] gigaset: small documentation improvement Clarify the non-support by isdnlog, and propose a better standard debug mask. Impact: Documentation Signed-off-by: Tilman Schmidt --- Documentation/isdn/README.gigaset | 10 +++++----- 1 files changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset index 794941f..e472df8 100644 --- a/Documentation/isdn/README.gigaset +++ b/Documentation/isdn/README.gigaset @@ -292,10 +292,10 @@ GigaSet 307x Device Driver to /etc/modprobe.d/gigaset, /etc/modprobe.conf.local or a similar file. Problem: - Your isdn script aborts with a message about isdnlog. + The isdnlog program emits error messages or just doesn't work. Solution: - Try deactivating (or commenting out) isdnlog. This driver does not - support it. + Isdnlog supports only the HiSax driver. Do not attempt to use it with + other drivers such as Gigaset. Problem: You have two or more DECT data adapters (M101/M105) and only the @@ -321,8 +321,8 @@ GigaSet 307x Device Driver writing an appropriate value to /sys/module/gigaset/parameters/debug, e.g. echo 0 > /sys/module/gigaset/parameters/debug switches off debugging output completely, - echo 0x10a020 > /sys/module/gigaset/parameters/debug - enables the standard set of debugging output messages. These values are + echo 0x302020 > /sys/module/gigaset/parameters/debug + enables a reasonable set of debugging output messages. These values are bit patterns where every bit controls a certain type of debugging output. See the constants DEBUG_* in the source file gigaset.h for details. -- 1.6.5.3.298.g39add