From: Kim Phillips Date: Tue, 23 Feb 2010 18:48:15 -0600 Subject: [U-Boot] [PATCH] mpc8315erdb: fix out-of-tree building for NAND config In-Reply-To: <20100223225842.A041DE8CCE0@gemini.denx.de> References: <1266785576-529-1-git-send-email-wd@denx.de> <20100222192612.8da0a6b6.kim.phillips@freescale.com> <20100223225842.A041DE8CCE0@gemini.denx.de> Message-ID: <20100223184815.84b28de2.kim.phillips@freescale.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tue, 23 Feb 2010 23:58:42 +0100 Wolfgang Denk wrote: > Dear Kim Phillips, > > In message <20100222192612.8da0a6b6.kim.phillips@freescale.com> you wrote: > > On Sun, 21 Feb 2010 21:52:56 +0100 > > Wolfgang Denk wrote: > > > > > Out-of-tree build for MPC8315ERDB_NAND configuration failed with > > > /bin/sh: line 0: cd: /tmp/foo/nand_spl/board/freescale/mpc8315erdb: No such file or directory > > > error message > > > > > > Signed-off-by: Wolfgang Denk > > > --- > > > > applied. > > Please undo. This is still broken. > > Running an out of tree build for MPC8315ERDB_NAND causes the > symbolic link > nand_spl/board/freescale/mpc8315erdb -> mpc8313erdb > to be created in the local source tree. But the local source tree must > be left unchanged for out of tree builds (assume it is on a read-only > storage device). > > As is, I see no straightforward way to acchieve this - the current > implementation assumes there is a board directory mpc8315erdb which > does not exist. > > I think this must be changed on a deeper level. > > Can you please look into this? Thanks. it seems a complete merge of mpc8313 and mpc8315 into mpc831x is in order. I'll see what I can do. Kim