From: Andre Prendel Date: Thu, 04 Mar 2010 09:17:41 +0000 Subject: Re: [lm-sensors] 2.6.33 on jetway nc81-lf board Message-Id: <20100304091741.GA1995@andre-laptop> List-Id: References: <4B8C0598.2060000@xs4all.nl> <20100302213709.951ee97b.akpm@linux-foundation.org> In-Reply-To: <20100302213709.951ee97b.akpm@linux-foundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Andrew Morton Cc: Udo van den Heuvel , linux-kernel@vger.kernel.org, lm-sensors@lm-sensors.org On Tue, Mar 02, 2010 at 09:37:09PM -0800, Andrew Morton wrote: > (cc lm-sensors) > > On Mon, 01 Mar 2010 19:21:12 +0100 Udo van den Heuvel wrote: > > > Hello, Hi, > > > > I just compiled 2.6.33 on a Jetway NC81-LF board with AMD 235E CPU. > > While trying to get lm_sensors to work I get in dmesg stuff like: > > > > f71882fg: Found f71862fg chip at 0x220, revision 18 > > ACPI: I/O resource f71882fg [0x220-0x227] conflicts with ACPI region > > IP__ [0x225-0x226] > > ACPI: If an ACPI driver is available for this device, you should use it > > instead of the native driver > > ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region > > SOR1 [0xb00-0xb0f] > > ACPI: If an ACPI driver is available for this device, you should use it > > instead of the native driver > > > > > > No other sensor-related modules are loaded. > > > > What could be wrong? See lm-sensors FAQ Chapter3 #39: http://www.lm-sensors.org/wiki/FAQ/Chapter3#Mysensorshavestoppedworkinginkernel2.6.31 Regards, Andre _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors