From: Wolfgang Denk Date: Tue, 16 Mar 2010 15:34:28 +0100 Subject: [U-Boot] Peripheral multiplexing in devices In-Reply-To: <4B9F89B2.8040101@st.com> References: <4B9F89B2.8040101@st.com> Message-ID: <20100316143428.690F45086C@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Vipin KUMAR, In message <4B9F89B2.8040101@st.com> you wrote: > > Now, we want to support this in sw in such a way that we have a single > image for linux for all possible configurations. We intend to do this > though bootloader (u-boot in this case) This may be possible, but it is not wise, nor the officially supported mode of operation in U-Boot. Please see bullet 2 at http://www.denx.de/wiki/U-Boot/DesignPrinciples#KeepFast and related entries - U-Boot is not supposed to initialize things it does not need for it's own operation. > SPEAr has an arm platform and linux-arm doesn't seem to support peripheral > multiplexing in the way we want. Though, I could see some stuff fo that > kind in ppc platform supported by u-boot to pass device information to > linux We use the device tree to do things like this. > Do we have a similar way for arm based platforms as well or any other > suggestions. Please check out Grant Likely's work to bring the device tree to ARM Linux. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de It would seem that evil retreats when forcibly confronted -- Yarnek of Excalbia, "The Savage Curtain", stardate 5906.5