From: Mike Frysinger Date: Thu, 25 Mar 2010 13:49:08 -0400 Subject: [U-Boot] [PATCH] net, fec_mxc: use mac address stored in env before looking in eeprom In-Reply-To: References: <4BA9FDEC.9010903@denx.de> <20100325094002.00014E731ED@gemini.denx.de> Message-ID: <201003251349.10386.vapier@gentoo.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thursday 25 March 2010 09:16:55 Detlev Zundel wrote: > >> Ok, but this driver initialize in fec_probe() (which gets called > >> through fecmxc_initialize() on uboot startup) always the fec mac > >> address registers with eeprom mac address. So, if uboot not uses > > > > The question to me is why fec_probe() is called at all, even in cases > > where U-Boot does not use any network related commands. This is IMO > > wrong. Eventually somebody comes up with patches to fix this? > > As I said before, this is documented in doc/README.drivers.eth. If you > want to change this, then maybe one should first fix the documentation > to know what is actually wanted. I certainly have lost track of what is > wanted and what is sensible. and as i said before, i think you're mistaken. please highlight the *exact* areas of the doc you think permits this behavior. -mike -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: This is a digitally signed message part. Url : http://lists.denx.de/pipermail/u-boot/attachments/20100325/9b037f11/attachment.pgp