From: Wolfgang Denk Date: Wed, 31 Mar 2010 08:50:18 +0200 Subject: [U-Boot] Loading and Running u-boot from context RAM In-Reply-To: <875745.66478.qm@web46116.mail.sp1.yahoo.com> References: <875745.66478.qm@web46116.mail.sp1.yahoo.com> Message-ID: <20100331065018.3022BE73028@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Ronny D, In message <875745.66478.qm@web46116.mail.sp1.yahoo.com> you wrote: > > I am working on PPC440 based customized board having 4MB context ram. > > what are all changes need to perform to skip relocation of u-boot in DDR > and relocated it to context ram and run from the same location. first: why would you want to do that? Which advantages do you expect compared to running from DDR? It might be sufficient to change the initialization of "addr" in board_init_f() in "lib_ppc/board.c"; instead of basing it on "CONFIG_SYS_SDRAM_BASE + get_effective_memsize()" set it to the end address of your contaxt RAM (+1). Be careful about the relocation of the exception vectors, though. These probably still need to be relocated to 0. I don't know which other obstacles might be on that way - U-Boot's memory map on Power silently assumes that it has contiguous memory from 0 through the current image address. Also, 4 MB might not be sufficient for example to hold the malloc arena if you want to uncompress bigger bz2 compressed images, and so on. All in all I expect some effort especially for debugging, and little or no benefit. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "There is no distinctly American criminal class except Congress." - Mark Twain