From: Rabin VINCENT Date: Tue, 6 Apr 2010 16:46:22 +0530 Subject: [U-Boot] [PATCH 1/8] Nomadik: move timer code to drivers/misc In-Reply-To: <4BAF9219.3090609@windriver.com> References: <1268886061-6382-1-git-send-email-rabin.vincent@stericsson.com> <1268886061-6382-2-git-send-email-rabin.vincent@stericsson.com> <4BAF9219.3090609@windriver.com> Message-ID: <20100406111621.GA7459@bnru02.bnr.st.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Sun, Mar 28, 2010 at 07:30:01PM +0200, Tom wrote: > Rabin Vincent wrote: > > The Nomadik MTU driver will also be used on the U8500 SoC, so move it > > out of platform-specific code. > > > > Acked-by: Alessandro Rubini > > Acked-by: Michael Brandt > > Signed-off-by: Rabin Vincent > > --- > > cpu/arm926ejs/nomadik/Makefile | 2 +- > > drivers/misc/Makefile | 1 + > > .../nomadik/timer.c => drivers/misc/nomadik_mtu.c | 2 +- > > include/configs/nhk8815.h | 1 + > > .../{asm-arm/arch-nomadik/mtu.h => nomadik_mtu.h} | 0 > > Move the nomadik_gpio.h and nomadik_mtu.h into nomadik.h > Just to have 1 nomadik *.h nomadik.h is currently used for 8815-specific addresses. If Alessandro has no objections, I will move it to, say, nmdk8815.h and then combine the common peripheral headers into nomadik.h. Rabin