Date: Sun, 11 Apr 2010 20:18:05 +0200 From: Gert Doering Message-ID: <20100411181805.GZ12312@...1296...> References: <1ae7a5fdae1e6d71bb7708a4f75ff060e3237c1c.1270060247.git.fabian.knittel@...1338...> <20100331231158.2782.qmail@...1287...> <4BB45497.8040707@...1338...> <4BB46059.9080208@...1147...> Mime-Version: 1.0 In-Reply-To: <4BB46059.9080208@...1147...> Subject: Re: [Openvpn-devel] [PATCH 4/9] vlan: Prepend and remove VLAN identifiers on outgoing and incoming frames List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit Content-Disposition: inline To: Jan Just Keijser Cc: openvpn-devel@lists.sourceforge.net Hi, On Thu, Apr 01, 2010 at 10:59:05AM +0200, Jan Just Keijser wrote: > > Hm, nice idea. I'll implement it in my next round of patches. > > > FYI: 802.1Q defines VLAN 1 as the 'native' LAN: all packets on VLAN 1 > are *by definition* not encapsulated (according to my CCNA guide ;-)) > VID 0 means "priority frames" > Perhaps we need to make sure that VID 1 means untagged ... Different vendors handle this differently - on Cisco, for example, you can make vlan 1 tagged and have the "native" VLAN on a port (= untagged transmissions) on a different VID. So you can't rely on "VID 1 = untagged". gert -- USENET is *not* the non-clickable part of WWW! //www.muc.de/~gert/ Gert Doering - Munich, Germany gert@...1296... fax: +49-89-35655025 gert@...1297...