From: Wolfgang Denk <wd@denx.de>
Date: Thu, 06 May 2010 00:40:31 +0200
Subject: [U-Boot] [PATCH] tx25: fix crash while booting Linux
In-Reply-To: <4BCF02B0.60209@denx.de>
References: <1271850758-25478-1-git-send-email-agust@denx.de>
	<4BCF02B0.60209@denx.de>
Message-ID: <20100505224031.42B3EB0FF81@gemini.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Stefano Babic,

In message <4BCF02B0.60209@denx.de> you wrote:
> Anatolij Gustschin wrote:
> > Currently booting Linux on TX25 board doesn't work
> > since there is no correct mach-id and boot parameters
> > setup for tx25 board. Fix it now.
> > 
> > Signed-off-by: Anatolij Gustschin <agust@denx.de>
> > Cc: John Rigby <jcrigby@gmail.com>
> > Cc: Stefano Babic <sbabic@denx.de>
> > ---
> >  board/karo/tx25/tx25.c |    3 +++
> >  1 files changed, 3 insertions(+), 0 deletions(-)
> > 
> > diff --git a/board/karo/tx25/tx25.c b/board/karo/tx25/tx25.c
> > index 4d6a96d..2608698 100644
> > --- a/board/karo/tx25/tx25.c
> > +++ b/board/karo/tx25/tx25.c
> > @@ -145,6 +145,9 @@ int board_init()
> >  
> >  	mx25_uart_init_pins();
> >  #endif
> > +	/* board id for linux */
> > +	gd->bd->bi_arch_number = MACH_TYPE_TX25;
> > +	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
> >  	return 0;
> >  }
> >  
> 
> Applied to u-boot-imx, thanks.

Will you send a pull request to Tom any time soon?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It would be illogical to kill without reason
	-- Spock, "Journey to Babel", stardate 3842.4