From: Wolfgang Denk Date: Fri, 07 May 2010 00:06:49 +0200 Subject: [U-Boot] [PATCH 3/3] TI: DaVinci: Create configuration file for da850 EVM In-Reply-To: <1272445230-427-1-git-send-email-sudhakar.raj@ti.com> References: <1272445230-427-1-git-send-email-sudhakar.raj@ti.com> Message-ID: <20100506220649.C34C1E8AAC9@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Sudhakar Rajashekhara, In message <1272445230-427-1-git-send-email-sudhakar.raj@ti.com> you wrote: > Provides initial support for TI OMAP-L138/DA850 SoC devices > on a Logic PD EVM board. > > Signed-off-by: Sudhakar Rajashekhara > --- > MAINTAINERS | 4 + > MAKEALL | 1 + > Makefile | 3 + > include/configs/da850evm.h | 135 ++++++++++++++++++++++++++++++++++++++++++++ > 4 files changed, 143 insertions(+), 0 deletions(-) > create mode 100644 include/configs/da850evm.h Patches 2 and 3 should be merged into one, please. > diff --git a/MAINTAINERS b/MAINTAINERS > index a5d5835..c52803d 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -758,6 +758,10 @@ Nick Thompson > > da830evm ARM926EJS (DA830/OMAP-L137) > > +Sudhakar Rajashekhara > + > + da850evm ARM926EJS (DA850/OMAP-L138) > + > Albin Tonnerre Please keep list sorted. > diff --git a/Makefile b/Makefile > index 393b180..0f21db6 100644 > --- a/Makefile > +++ b/Makefile > @@ -2913,6 +2913,9 @@ cp922_XA10_config \ > cp1026_config: unconfig > @board/armltd/integrator/split_by_variant.sh cp $@ > > +da850evm_config: unconfig > + @$(MKCONFIG) $(@:_config=) arm arm926ejs da8xxevm davinci davinci > + > da830evm_config: unconfig > @$(MKCONFIG) $(@:_config=) arm arm926ejs da8xxevm davinci davinci Please keep list sorted, and use just a single entry, i. e.: da830evm_config \ da850evm_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs da8xxevm davinci davinci > diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h > new file mode 100644 > index 0000000..2fcc76d > --- /dev/null > +++ b/include/configs/da850evm.h ... > +/* > + * Memory Info > + */ > +#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ > +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* reserved for initial data */ > +#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ > +#define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ > +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 + 0x2000000 /* memtest start addr */ > +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) /* 16MB test */ Line too long. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The reasonable man adapts himself to the world; the unreasonable one persists in trying to adapt the world to himself. Therefore all progress depends on the unreasonable man." - George Bernard Shaw