From: linux@arm.linux.org.uk (Russell King - ARM Linux) Date: Mon, 10 May 2010 16:18:27 +0100 Subject: FW: [PATCH 0/7] DMAENGINE: fixes and PrimeCells In-Reply-To: <000101caf052$db991e30$9446010a@Emea.Arm.com> References: <000101caf052$db991e30$9446010a@Emea.Arm.com> Message-ID: <20100510151827.GA4281@n2100.arm.linux.org.uk> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, May 10, 2010 at 04:09:59PM +0100, Peter Pearse wrote: > > > > -----Original Message----- > > From: Peter Pearse [mailto:peter.pearse at arm.com] > > Sent: 07 May 2010 16:01 > > To: 'Linus Walleij' > > Cc: linux-arm-kernel at lists.arm.linux.org.uk > > Subject: RE: [PATCH 0/7] DMAENGINE: fixes and PrimeCells > > > > Linus > > > > I've applied > > > > [PATCH 04/11] ARM: define the PrimeCell DMA API v5 > > [PATCH 5/7] ARM: add PrimeCell generic DMA to PL011 v6 > > [PATCH 6/7] ARM: add PrimeCell generic DMA to MMCI/PL180 v6 > > > > to Russell's versatile tree. > > > > A Versatile Express board running the resulting kernel image > > boots with serial output > > accepts serial input > > reads & writes an MMC card To be clear, what I'm *not* interested in is whether the primecell drivers work without DMA support implemented on the platform. What I *am* interested in is whether Versatile _with_ DMA support implemented - with the added problems of the MUX in the system controller - can work sanely with this "generic Primecell DMA" implementation.