From: greg@kroah.com (Greg KH) Date: Tue, 11 May 2010 16:38:12 -0700 Subject: [PATCH 1/1 v2] ehci-mxc: Fix mx31 OTG host initialisation In-Reply-To: <1273587274-8045-2-git-send-email-philippe.retornaz@epfl.ch> References: <1273587274-8045-1-git-send-email-philippe.retornaz@epfl.ch> <1273587274-8045-2-git-send-email-philippe.retornaz@epfl.ch> Message-ID: <20100511233811.GB31311@kroah.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, May 11, 2010 at 04:14:34PM +0200, Philippe R?tornaz wrote: > On mx31 the OTG host initialisation fails if you need to have > an ULPI transfert to initialize the PHY. > > In order to be able to communicate with the PHY a complete reset > of the usb host is needed. After the PHY initialization the host > usb configuration registers need to be rewritten to avoid a host > controller lockup. > > Signed-off-by: Philippe R?tornaz > --- > drivers/usb/host/ehci-mxc.c | 98 ++++++++++++++++++++++++++++++++++++++----- This patch doesn't apply anymore, can you redo it against the linux-next tree? thanks, greg k-h