From: tbm@cyrius.com (Martin Michlmayr) Date: Sat, 22 May 2010 02:23:10 +0100 Subject: [PATCH] Kirkwood: Export GPIO indicating jumper setting of JP1 Message-ID: <20100522012310.GA10623@jirafa.cyrius.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Export GPIO 45 which is used to indicate the setting of the JP1 jumper. This is useful for userland tools, such as qcontrol, to see whether the LCD or a serial console is connected. Signed-off-by: Martin Michlmayr diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c index de49c2d..df8a7e0 100644 --- a/arch/arm/mach-kirkwood/ts41x-setup.c +++ b/arch/arm/mach-kirkwood/ts41x-setup.c @@ -2,7 +2,7 @@ * * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup * - * Copyright (C) 2009 Martin Michlmayr + * Copyright (C) 2009-2010 Martin Michlmayr * Copyright (C) 2008 Byron Bradley * * This program is free software; you can redistribute it and/or @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -26,6 +27,8 @@ #include "mpp.h" #include "tsx1x-common.h" +#define QNAP_TS41X_JUMPER_JP1 45 + static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = { I2C_BOARD_INFO("s35390a", 0x30), }; @@ -131,6 +134,8 @@ static void __init qnap_ts41x_init(void) pm_power_off = qnap_tsx1x_power_off; + if (gpio_request(QNAP_TS41X_JUMPER_JP1, "JP1") == 0) + gpio_export(QNAP_TS41X_JUMPER_JP1, 0); } static int __init ts41x_pci_init(void) -- Martin Michlmayr http://www.cyrius.com/