From: "Rafael J. Wysocki" Subject: Re: Sony vaio serie F PCIe PME service failure. Date: Sun, 23 May 2010 20:38:55 +0200 Message-ID: <201005232038.55698.rjw@sisk.pl> References: <4BF6FEA4.1050406@gmail.com> <201005231944.51135.maciej.rutecki@gmail.com> Mime-Version: 1.0 Content-Type: Text/Plain; charset=utf-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from ogre.sisk.pl ([217.79.144.158]:60232 "EHLO ogre.sisk.pl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755053Ab0EWShu convert rfc822-to-8bit (ORCPT ); Sun, 23 May 2010 14:37:50 -0400 In-Reply-To: <201005231944.51135.maciej.rutecki@gmail.com> Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: maciej.rutecki@gmail.com Cc: Xavier Gnata , Linux Kernel Mailing List , lenb@kernel.org, linux-acpi@vger.kernel.org On Sunday 23 May 2010, Maciej Rutecki wrote: > (Add CC) >=20 > 2.6.33.* works OK? >=20 > On pi=C4=85tek, 21 maja 2010 o 23:44:04 Xavier Gnata wrote: > > Hi, > >=20 > > I get that during the boot of the vaio VPCF11M1E using unpatched 2.= 6.34 > > from kernel.org: > >=20 > > [ 2.047242] pcieport 0000:00:01.0: Failed to receive control of = PCIe > > PME service: ACPI _OSC failed > > [ 2.047249] pcie_pme: probe of 0000:00:01.0:pcie01 failed with e= rror -13 > > [ 2.047418] pcieport 0000:00:1c.0: Failed to receive control of = PCIe > > PME service: ACPI _OSC failed > > [ 2.047424] pcie_pme: probe of 0000:00:1c.0:pcie01 failed with e= rror -13 > > [ 2.047589] pcieport 0000:00:1c.1: Failed to receive control of = PCIe > > PME service: ACPI _OSC failed > > [ 2.047595] pcie_pme: probe of 0000:00:1c.1:pcie01 failed with e= rror -13 > > [ 2.047759] pcieport 0000:00:1c.2: Failed to receive control of = PCIe > > PME service: ACPI _OSC failed > > [ 2.047764] pcie_pme: probe of 0000:00:1c.2:pcie01 failed with e= rror -13 > > [ 2.047928] pcieport 0000:00:1c.5: Failed to receive control of = PCIe > > PME service: ACPI _OSC failed > > [ 2.047933] pcie_pme: probe of 0000:00:1c.5:pcie01 failed with e= rror -13 > >=20 > > for i in /sys/bus/pnp/devices/*; do echo $i; cat $i/id; done > > returns : > >=20 > > /sys/bus/pnp/devices/00:00 > > PNP0a08 > > PNP0a03 > > /sys/bus/pnp/devices/00:01 > > PNP0200 > > /sys/bus/pnp/devices/00:02 > > INT0800 > > /sys/bus/pnp/devices/00:03 > > PNP0103 > > /sys/bus/pnp/devices/00:04 > > PNP0c04 > > /sys/bus/pnp/devices/00:05 > > PNP0c02 > > /sys/bus/pnp/devices/00:06 > > PNP0b00 > > /sys/bus/pnp/devices/00:07 > > PNP0303 > > /sys/bus/pnp/devices/00:08 > > SNY9011 > > PNP0f13 > > /sys/bus/pnp/devices/00:09 > > PNP0c02 > > /sys/bus/pnp/devices/00:0a > > PNP0a03 > >=20 > >=20 > > Everthing looks fine except these messages during the boot. > > Any clue about what's going wrong? (maybe nothing...) Actually nothing. Your BIOS doesn't want us to use the native PCIe PME= on root ports. There's nothing wrong with that, but we want to know in case PCI runtim= e PM doesn't work. Rafael -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html