From: Wolfgang Denk Date: Thu, 27 May 2010 23:06:58 +0200 Subject: [U-Boot] [PATCH] [RFC] memsize.c: adapt get_ram_size() for address spaces >32 bit In-Reply-To: <4BFED0CD.5010301@freescale.com> References: <1274983869-9173-1-git-send-email-wd@denx.de> <20100527194442.632FEEAC238@gemini.denx.de> <4BFED0CD.5010301@freescale.com> Message-ID: <20100527210658.63B38EAC238@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Scott Wood, In message <4BFED0CD.5010301@freescale.com> you wrote: > > Not using get_ram_size(), which is of minimal utility when you know the > actual size (and is an unsafe approach to the problem when you don't, > unless you know a lot about where I/O is mapped and how the system > responds to accessing memory that doesn't exist -- not exactly the sort > of thing you want to make a mandate for any board to be accepted), seems > like a good way to "fix it". Come on. Anybody who does NOT know the exact memory map of a system (and is able to define it as needed) is obviously not in a position to port U-Boot to this hardware. This is basic knowledge. > "All other PowerPC systems" is a ridiculous overstatement. I see > exactly *one* Freescale board that uses this thing, and it's an ARM board. And this uses it incorrectly, like all ARM boards, if I'm not wrong. Well, there is a ton of other boards besides the ones manufactured by Freescale, including many that use Freescale chips. I am not to blame if Freescale did not pick up a number of design concepts. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de I object to intellect without discipline; I object to power without constructive purpose. -- Spock, "The Squire of Gothos", stardate 2124.5