From: baruch@tkos.co.il (Baruch Siach) Date: Mon, 31 May 2010 08:41:43 +0300 Subject: [PATCH] mxc_nand: Fix OOB accesses on i.MX27 In-Reply-To: <20100528080217.GH23664@pengutronix.de> References: <20100528080217.GH23664@pengutronix.de> Message-ID: <20100531054142.GA6514@jasper.tkos.co.il> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Sascha, On Fri, May 28, 2010 at 10:02:17AM +0200, Sascha Hauer wrote: > The OOB handling in the mxc_nand driver is broken for v1 type > controllers (i.MX27/31) with 512 byte page size. This perhaps > did not show up because ubi does not use OOB. > Update the driver to always read/write a whole page even if > only OOB is requested. With this patch the driver passes the > mtd_oobtest on i.MX27 with 512 byte page size. Also tested > with 2048 byte page size and on i.MX35 (v2 type controller) > > Signed-off-by: Sascha Hauer Tested on i.MX25 with 2K page size. baruch > --- > drivers/mtd/nand/mxc_nand.c | 31 +++++-------------------------- > 1 files changed, 5 insertions(+), 26 deletions(-) > > diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c > index 82e9438..6e8aa34 100644 > --- a/drivers/mtd/nand/mxc_nand.c > +++ b/drivers/mtd/nand/mxc_nand.c > @@ -623,8 +623,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, > else > host->buf_start = column + mtd->writesize; > > - if (mtd->writesize > 512) > - command = NAND_CMD_READ0; /* only READ0 is valid */ > + command = NAND_CMD_READ0; /* only READ0 is valid */ > > send_cmd(host, command, false); > mxc_do_addr_cycle(mtd, column, page_addr); > @@ -639,31 +638,11 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, > break; > > case NAND_CMD_SEQIN: > - if (column >= mtd->writesize) { > - /* > - * FIXME: before send SEQIN command for write OOB, > - * We must read one page out. > - * For K9F1GXX has no READ1 command to set current HW > - * pointer to spare area, we must write the whole page > - * including OOB together. > - */ > - if (mtd->writesize > 512) > - /* call ourself to read a page */ > - mxc_nand_command(mtd, NAND_CMD_READ0, 0, > - page_addr); > - > - host->buf_start = column; > - > - /* Set program pointer to spare region */ > - if (mtd->writesize == 512) > - send_cmd(host, NAND_CMD_READOOB, false); > - } else { > - host->buf_start = column; > + if (column >= mtd->writesize) > + /* call ourself to read a page */ > + mxc_nand_command(mtd, NAND_CMD_READ0, 0, page_addr); > > - /* Set program pointer to page start */ > - if (mtd->writesize == 512) > - send_cmd(host, NAND_CMD_READ0, false); > - } > + host->buf_start = column; > > send_cmd(host, command, false); > mxc_do_addr_cycle(mtd, column, page_addr); > -- > 1.7.1 > > -- > Pengutronix e.K. | | > Industrial Linux Solutions | http://www.pengutronix.de/ | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -