From: Wolfgang Denk Date: Mon, 31 May 2010 14:40:44 +0200 Subject: [U-Boot] [PATCH v2] s5pc1xx: Add support for Samsung Goni board In-Reply-To: References: <4C0309E2.2030206@samsung.com> <20100531103847.A8F56C15848@gemini.denx.de> Message-ID: <20100531124044.72283C15848@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Minkyu Kang, In message you wrote: > ... > >> index 0000000..6239444 > >> --- /dev/null > >> +++ b/include/configs/s5p_goni.h > > ... > >> +#undef CONFIG_CMD_BOOTD > >> +#undef CONFIG_CMD_CONSOLE > >> +#undef CONFIG_CMD_ECHO > >> +#undef CONFIG_CMD_FPGA > >> +#undef CONFIG_CMD_ITEST > >> +#undef CONFIG_CMD_FLASH > >> +#undef CONFIG_CMD_IMLS > >> +#undef CONFIG_CMD_LOADB > >> +#undef CONFIG_CMD_LOADS > >> +#undef CONFIG_CMD_NAND > >> +#undef CONFIG_CMD_MISC > >> +#undef CONFIG_CMD_NFS > >> +#undef CONFIG_CMD_SOURCE > >> +#undef CONFIG_CMD_XIMG > >> +#undef CONFIG_CMD_NET > >> +#undef CONFIG_XYZMODEM > > > > Many of these commands are pretty useful to the end user. Is there a > > special reason for disabling these here? It seems you are not > > especially restricted in terms of resources, so I don't understand > > why you disable these. > > Goni doesn't have NOR flash, NAND flash and Network device. > So, I disabled about flash, nand and network commands. > Others are for reducing image size. (about 10KiB) > Anyway, I'll enable some useful commands. Thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Speculation is always more interesting than facts. - Terry Pratchett, _Making_Money_