From: Wolfgang Denk Date: Tue, 01 Jun 2010 09:17:36 +0200 Subject: [U-Boot] Defer net initialization In-Reply-To: <201006010824.25437.alexander.stein@systec-electronic.com> References: <201005311458.18454.alexander.stein@systec-electronic.com> <20100531160830.415F6C15848@gemini.denx.de> <201006010817.41571.alexander.stein@systec-electronic.com> <201006010824.25437.alexander.stein@systec-electronic.com> Message-ID: <20100601071736.245DFAFC6B3@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Alexander Stein, In message <201006010824.25437.alexander.stein@systec-electronic.com> you wrote: > > > Currently I'm using u-boot v2009.11 on at91sam9g20 on our own board (code > > yet upstream). > > Oh, i forgot. This code is based on the atmel at91sam9g20ek board code which > is included in at91sam9260ek. I don't know this port really well (and the AT91 family has been orphaned and without active custodian for a long time), but it should not touch the PHY (and especially not wait for a link) unless a network command is being run in U-Boot. There have been some discussions about this topic recently (see for example thread starting here: http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/76507). Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Bus error -- driver executed.