From: Jean Delvare Date: Wed, 30 Jun 2010 15:30:05 +0000 Subject: [lm-sensors] [PATCH] hwmon: Remove in[0-*]_fault from Message-Id: <20100630173005.11c90c64@hyperion.delvare> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Fault files are for hardware failures that can be reported. So far we've seen chips reporting such failures for temperature sensors and fans, but not for voltages. Remove in[0-*]_fault for now. It can be added back later if really needed, but I doubt it. Signed-off-by: Jean Delvare Cc: Guenter Roeck --- Documentation/hwmon/sysfs-interface | 1 - 1 file changed, 1 deletion(-) --- linux-2.6.35-rc3.orig/Documentation/hwmon/sysfs-interface 2010-06-30 09:10:06.000000000 +0200 +++ linux-2.6.35-rc3/Documentation/hwmon/sysfs-interface 2010-06-30 17:24:09.000000000 +0200 @@ -516,7 +516,6 @@ to notify open diodes, unconnected fans supports it. When this boolean has value 1, the measurement for that channel should not be trusted. -in[0-*]_fault fan[1-*]_fault temp[1-*]_fault Input fault condition -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors