From: Wolfgang Denk Date: Wed, 14 Jul 2010 22:09:27 +0200 Subject: [U-Boot] [Nios] Pull Request In-Reply-To: <4C3B3FB3.3050009@psyent.com> References: <4C3B3FB3.3050009@psyent.com> Message-ID: <20100714200927.706BC160691@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Scott McNutt, In message <4C3B3FB3.3050009@psyent.com> you wrote: > Dear Wolfgang, > > The following changes since commit 54841ab50c20d6fa6c9cc3eb826989da3a22d934: > Wolfgang Denk (1): > Make sure that argv[] argument pointers are not modified. > > are available in the git repository at: > > git://git.denx.de/u-boot-nios.git next > > Thomas Chou (6): > nios2: use gc sections to reduce image size > nios2: add fdt support > nios2: add gpio_request > gpio_led: add gpio_request to __led_init > nios2: add spi flash support to nios2-generic board > nios2: remove EP1C20, EP1S10, EP1S40 boards > > MAINTAINERS | 3 - > MAKEALL | 3 - > arch/nios2/config.mk | 3 + > arch/nios2/include/asm/gpio.h | 6 + > arch/nios2/lib/bootm.c | 21 +++ > board/altera/ep1c20/Makefile | 55 -------- > board/altera/ep1c20/config.mk | 31 ----- > board/altera/ep1c20/ep1c20.c | 52 ------- > board/altera/ep1s10/Makefile | 55 -------- > board/altera/ep1s10/config.mk | 31 ----- > board/altera/ep1s10/ep1s10.c | 52 ------- > board/altera/ep1s40/Makefile | 55 -------- > board/altera/ep1s40/config.mk | 31 ----- > board/altera/ep1s40/ep1s40.c | 47 ------- > board/altera/nios2-generic/custom_fpga.h | 10 ++ > board/altera/nios2-generic/gpio.c | 5 + > boards.cfg | 3 - > drivers/misc/gpio_led.c | 12 +- > include/configs/EP1C20.h | 214 > ------------------------------ > include/configs/EP1S10.h | 207 > ----------------------------- > include/configs/EP1S40.h | 207 > ----------------------------- > 21 files changed, 49 insertions(+), 1054 deletions(-) > delete mode 100644 board/altera/ep1c20/Makefile > delete mode 100644 board/altera/ep1c20/config.mk > delete mode 100644 board/altera/ep1c20/ep1c20.c > delete mode 100644 board/altera/ep1s10/Makefile > delete mode 100644 board/altera/ep1s10/config.mk > delete mode 100644 board/altera/ep1s10/ep1s10.c > delete mode 100644 board/altera/ep1s40/Makefile > delete mode 100644 board/altera/ep1s40/config.mk > delete mode 100644 board/altera/ep1s40/ep1s40.c > delete mode 100644 include/configs/EP1C20.h > delete mode 100644 include/configs/EP1S10.h > delete mode 100644 include/configs/EP1S40.h Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "Ja, mach' nur einen Plan, sei nur ein grosses Licht und mach' dann noch 'nen zweiten Plan, geh'n tun sie beide nicht." -- Bert Brecht, Dreigroschenoper