From: Simon Horman Subject: Re: IPv6 Anycast? Date: Mon, 26 Jul 2010 17:44:21 +0900 Message-ID: <20100726084418.GA14903@verge.net.au> References: <4C48B90B.60304@actusa.net> <4C491AD4.9070103@actusa.net> <4C49B163.8090400@actusa.net> <4C49C352.6010701@astaro.com> <4C49C92D.30705@actusa.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: Ulrich Weber , Mikael Abrahamsson , netdev@vger.kernel.org To: Stuart Sheldon Return-path: Received: from kirsty.vergenet.net ([202.4.237.240]:40506 "EHLO kirsty.vergenet.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751222Ab0GZIoZ (ORCPT ); Mon, 26 Jul 2010 04:44:25 -0400 Content-Disposition: inline In-Reply-To: <4C49C92D.30705@actusa.net> Sender: netdev-owner@vger.kernel.org List-ID: On Fri, Jul 23, 2010 at 09:54:05AM -0700, Stuart Sheldon wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA256 > > Hi Ulrich, > > Thanks, that resolves half the issue. So as of right now, there is no > userspace program to add anycast addresses? I was hoping to have some useful information, but alas I failed on that count. Looking at ip(8) it seems that the following ought to work: ip addr add fd16:a2f5:c4d7::7/48 anycast fd16:a2f5:c4d7::8 dev eth0 However, it seems not to, and then I found this in the manpage :-( anycast - not implemented the destinations are anycast addresses assigned to this host. They are mainly equivalent to local with one difference: such addresses are invalid when used as the source address of any packet.