From: =?iso-8859-1?q?R=FCdiger_H=E4rtel?= Subject: 845 help Date: Sun, 1 Aug 2010 20:49:06 +0200 Message-ID: <201008012049.06860.r_haertel@gmx.de> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Return-path: Received: from mail.gmx.net (mailout-de.gmx.net [213.165.64.22]) by gabe.freedesktop.org (Postfix) with SMTP id 22F1D9E746 for ; Sun, 1 Aug 2010 11:50:04 -0700 (PDT) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org Errors-To: intel-gfx-bounces+gcfxdi-intel-gfx=m.gmane.org@lists.freedesktop.org To: intel-gfx@lists.freedesktop.org List-Id: intel-gfx@lists.freedesktop.org Hello, I have a 845GL graphics chip and the driver reports nearly every time I use= my = copmuter that the GPU has hung up and acceleration is disabled. After this = happend a restart of X - which happens when I log off and on again - is not = possible anymore. Is there any information I can provide to help finding the circumstances t= hat = lead to this behaviour? Regards, R=FCdiger My system: http://www.smolts.org/show?uuid=3Dpub_663f9f31-d4fc-4845-8d9b-04636d8df99d log file of X ------------>8---------->8--------------- [ 27.862] = X.Org X Server 1.8.0 Release Date: 2010-04-02 [ 27.925] X Protocol Version 11, Revision 0 [ 27.925] Build Operating System: openSUSE SUSE LINUX [ 27.925] Current Operating System: Linux linux-dtz7 2.6.34-12-default #= 1 = SMP 2010-06-29 02:39:08 +0200 i686 [ 27.925] Kernel command line: root=3D/dev/sda7 resume=3D/dev/disk/by-id= /ata- Maxtor_2F040L0_F1JJ857E-part6 splash=3Dsilent quiet elevator=3Dcfq vga=3D0x= 31a = i915.modeset=3D1 [ 27.925] Build Date: 05 July 2010 09:26:26PM [ 27.925] = [ 27.925] Current version of pixman: 0.18.0 [ 27.925] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 27.925] Markers: (--) probed, (**) from config file, (=3D=3D) default = setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 27.926] (=3D=3D) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 1 20:= 05:31 = 2010 [ 27.966] (=3D=3D) Using config directory: "/etc/X11/xorg.conf.d" [ 27.966] (=3D=3D) No Layout section. Using the first Screen section. [ 27.966] (**) |-->Screen "Default Screen" (0) [ 27.966] (**) | |-->Monitor "Default Monitor" [ 27.967] (**) | |-->Device "Default Device" [ 27.967] (=3D=3D) Automatically adding devices [ 27.967] (=3D=3D) Automatically enabling devices [ 27.967] (WW) The directory "/usr/share/fonts/TTF/" does not exist. [ 27.967] Entry deleted from font path. [ 27.967] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 27.967] Entry deleted from font path. [ 27.969] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist. [ 27.969] Entry deleted from font path. [ 27.969] (=3D=3D) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/URW/, /usr/share/fonts/cyrillic:unscaled, /usr/share/fonts/truetype/ [ 27.969] (=3D=3D) ModulePath set to = "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules" [ 27.969] (II) The server relies on udev to provide the list of input = devices. If no devices become available, reconfigure udev or disable = AutoAddDevices. [ 27.969] (II) Loader magic: 0x822e500 [ 27.969] (II) Module ABI versions: [ 27.969] X.Org ANSI C Emulation: 0.4 [ 27.969] X.Org Video Driver: 7.0 [ 27.969] X.Org XInput driver : 9.0 [ 27.969] X.Org Server Extension : 3.0 [ 28.045] (--) PCI:*(0:0:2:0) 8086:2562:1509:9016 Intel Corporation = 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 3, Mem @ = 0xd8000000/134217728, 0xe2000000/524288 [ 28.045] (II) Open ACPI successful (/var/run/acpid.socket) [ 28.045] (II) LoadModule: "extmod" [ 28.084] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 28.086] (II) Module extmod: vendor=3D"X.Org Foundation" [ 28.086] compiled for 1.8.0, module version =3D 1.0.0 [ 28.086] Module class: X.Org Server Extension [ 28.086] ABI class: X.Org Server Extension, version 3.0 [ 28.086] (II) Loading extension MIT-SCREEN-SAVER [ 28.086] (II) Loading extension XFree86-VidModeExtension [ 28.086] (II) Loading extension XFree86-DGA [ 28.086] (II) Loading extension DPMS [ 28.086] (II) Loading extension XVideo [ 28.086] (II) Loading extension XVideo-MotionCompensation [ 28.087] (II) Loading extension X-Resource [ 28.087] (II) LoadModule: "dbe" [ 28.091] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 28.095] (II) Module dbe: vendor=3D"X.Org Foundation" [ 28.095] compiled for 1.8.0, module version =3D 1.0.0 [ 28.095] Module class: X.Org Server Extension [ 28.095] ABI class: X.Org Server Extension, version 3.0 [ 28.095] (II) Loading extension DOUBLE-BUFFER [ 28.095] (II) LoadModule: "glx" [ 28.117] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 28.118] (II) Module glx: vendor=3D"X.Org Foundation" [ 28.118] compiled for 1.8.0, module version =3D 1.0.0 [ 28.118] ABI class: X.Org Server Extension, version 3.0 [ 28.118] (=3D=3D) AIGLX enabled [ 28.118] (II) Loading extension GLX [ 28.118] (II) LoadModule: "record" [ 28.137] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 28.137] (II) Module record: vendor=3D"X.Org Foundation" [ 28.137] compiled for 1.8.0, module version =3D 1.13.0 [ 28.137] Module class: X.Org Server Extension [ 28.137] ABI class: X.Org Server Extension, version 3.0 [ 28.137] (II) Loading extension RECORD [ 28.137] (II) LoadModule: "dri" [ 28.156] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 28.208] (II) Module dri: vendor=3D"X.Org Foundation" [ 28.208] compiled for 1.8.0, module version =3D 1.0.0 [ 28.208] ABI class: X.Org Server Extension, version 3.0 [ 28.208] (II) Loading extension XFree86-DRI [ 28.208] (II) LoadModule: "dri2" [ 28.210] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 28.211] (II) Module dri2: vendor=3D"X.Org Foundation" [ 28.211] compiled for 1.8.0, module version =3D 1.2.0 [ 28.211] ABI class: X.Org Server Extension, version 3.0 [ 28.211] (II) Loading extension DRI2 [ 28.211] (=3D=3D) Matched intel as autoconfigured driver 0 [ 28.211] (=3D=3D) Matched fbdev as autoconfigured driver 1 [ 28.211] (=3D=3D) Matched vesa as autoconfigured driver 2 [ 28.211] (=3D=3D) Assigned the driver to the xf86ConfigLayout [ 28.211] (II) LoadModule: "intel" [ 28.221] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 28.221] (II) Module intel: vendor=3D"X.Org Foundation" [ 28.221] compiled for 1.8.0, module version =3D 2.12.0 [ 28.221] Module class: X.Org Video Driver [ 28.221] ABI class: X.Org Video Driver, version 7.0 [ 28.221] (II) LoadModule: "fbdev" [ 28.223] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 28.230] (II) Module fbdev: vendor=3D"X.Org Foundation" [ 28.230] compiled for 1.8.0, module version =3D 0.4.1 [ 28.230] ABI class: X.Org Video Driver, version 7.0 [ 28.230] (II) LoadModule: "vesa" [ 28.236] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 28.236] (II) Module vesa: vendor=3D"X.Org Foundation" [ 28.236] compiled for 1.8.0, module version =3D 2.2.1 [ 28.237] Module class: X.Org Video Driver [ 28.237] ABI class: X.Org Video Driver, version 7.0 [ 28.237] (II) intel: Driver for Intel Integrated Graphics Chipsets: i81= 0, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale [ 28.237] (II) FBDEV: driver for framebuffer: fbdev [ 28.237] (II) VESA: driver for VESA chipsets: vesa [ 28.237] (++) using VT number 7 [ 28.247] (II) Primary Device is: PCI 00@00:02:0 [ 28.259] (WW) Falling back to old probe method for fbdev [ 28.259] (II) Loading sub module "fbdevhw" [ 28.259] (II) LoadModule: "fbdevhw" [ 28.260] (II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so [ 28.260] (II) Module fbdevhw: vendor=3D"X.Org Foundation" [ 28.261] compiled for 1.8.0, module version =3D 0.0.2 [ 28.261] ABI class: X.Org Video Driver, version 7.0 [ 28.261] (WW) Falling back to old probe method for vesa [ 28.267] drmOpenDevice: node name is /dev/dri/card0 [ 28.267] drmOpenDevice: open result is 9, (OK) [ 28.267] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 28.267] drmOpenDevice: node name is /dev/dri/card0 [ 28.267] drmOpenDevice: open result is 9, (OK) [ 28.267] drmOpenByBusid: drmOpenMinor returns 9 [ 28.267] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 28.267] (II) intel(0): Creating default Display subsection in Screen = section "Default Screen" for depth/fbbpp 24/32 [ 28.267] (=3D=3D) intel(0): Depth 24, (--) framebuffer bpp 32 [ 28.267] (=3D=3D) intel(0): RGB weight 888 [ 28.267] (=3D=3D) intel(0): Default visual is TrueColor [ 28.267] (II) intel(0): Integrated Graphics Chipset: Intel(R) 845G [ 28.267] (--) intel(0): Chipset: "845G" [ 28.267] (=3D=3D) intel(0): video overlay key set to 0x101fe [ 28.665] (II) intel(0): Output VGA1 using monitor section Default Monit= or [ 28.785] (II) intel(0): EDID for output VGA1 [ 28.785] (II) intel(0): Manufacturer: BNQ Model: 7681 Serial#: 4115 [ 28.785] (II) intel(0): Year: 2004 Week: 15 [ 28.785] (II) intel(0): EDID Version: 1.3 [ 28.785] (II) intel(0): Analog Display Input, Input Voltage Level: = 0.700/0.700 V [ 28.785] (II) intel(0): Sync: Separate Composite [ 28.785] (II) intel(0): Max Image Size [cm]: horiz.: 38 vert.: 30 [ 28.785] (II) intel(0): Gamma: 2.20 [ 28.785] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Col= or = Display [ 28.785] (II) intel(0): First detailed timing is preferred mode [ 28.785] (II) intel(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: = 0.614 [ 28.785] (II) intel(0): blueX: 0.146 blueY: 0.067 whiteX: 0.312 white= Y: = 0.328 [ 28.785] (II) intel(0): Supported established timings: [ 28.785] (II) intel(0): 720x400@70Hz [ 28.785] (II) intel(0): 640x480@60Hz [ 28.785] (II) intel(0): 640x480@67Hz [ 28.786] (II) intel(0): 640x480@72Hz [ 28.786] (II) intel(0): 640x480@75Hz [ 28.786] (II) intel(0): 800x600@60Hz [ 28.786] (II) intel(0): 800x600@72Hz [ 28.786] (II) intel(0): 800x600@75Hz [ 28.786] (II) intel(0): 832x624@75Hz [ 28.786] (II) intel(0): 1024x768@60Hz [ 28.786] (II) intel(0): 1024x768@70Hz [ 28.786] (II) intel(0): 1024x768@75Hz [ 28.786] (II) intel(0): 1280x1024@75Hz [ 28.790] (II) intel(0): 1152x864@75Hz [ 28.790] (II) intel(0): Manufacturer's mask: 0 [ 28.790] (II) intel(0): Supported standard timings: [ 28.790] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: = 20337 [ 28.790] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 76 vid: = 36993 [ 28.790] (II) intel(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: = 32897 [ 28.790] (II) intel(0): #3: hsize: 1280 vsize 1024 refresh: 72 vid: = 35969 [ 28.790] (II) intel(0): Supported detailed timing: [ 28.790] (II) intel(0): clock: 108.0 MHz Image Size: 376 x 301 mm [ 28.790] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 = h_blank_end 1688 h_border: 0 [ 28.790] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 = v_blanking: 1066 v_border: 0 [ 28.790] (II) intel(0): Supported detailed timing: [ 28.790] (II) intel(0): clock: 25.2 MHz Image Size: 376 x 301 mm [ 28.790] (II) intel(0): h_active: 640 h_sync: 656 h_sync_end 752 = h_blank_end 800 h_border: 0 [ 28.790] (II) intel(0): v_active: 350 v_sync: 387 v_sync_end 389 = v_blanking: 449 v_border: 0 [ 28.790] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max= : = 83 kHz, PixClock max 140 MHz [ 28.790] (II) intel(0): Monitor name: BenQ T904 [ 28.790] (II) intel(0): EDID (in hex): [ 28.790] (II) intel(0): 00ffffffffffff0009d1817613100000 [ 28.790] (II) intel(0): 0f0e01036c261e78eaa150a3574c9d25 [ 28.790] (II) intel(0): 115054bdef80714f81908180818c0101 [ 28.791] (II) intel(0): 010101010101302a009851002a403070 [ 28.791] (II) intel(0): 1300782d1100001ed50980a0205e6310 [ 28.791] (II) intel(0): 10605208782d1100001a000000fd0038 [ 28.791] (II) intel(0): 4c1f530e000a202020202020000000fc [ 28.791] (II) intel(0): 0042656e5120543930340a20202000b9 [ 28.791] (II) intel(0): EDID vendor "BNQ", prod id 30337 [ 28.791] (II) intel(0): Using EDID range info for horizontal sync [ 28.791] (II) intel(0): Using EDID range info for vertical refresh [ 28.791] (II) intel(0): Printing DDC gathered Modelines: [ 28.791] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 144= 0 = 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 28.791] (II) intel(0): Modeline "640x350"x0.0 25.17 640 656 752 800= = 350 387 389 449 +hsync -vsync (31.5 kHz) [ 28.791] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 105= 6 = 600 601 605 628 +hsync +vsync (37.9 kHz) [ 28.791] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840= = 480 481 484 500 -hsync -vsync (37.5 kHz) [ 28.791] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832= = 480 489 492 520 -hsync -vsync (37.9 kHz) [ 28.791] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864= = 480 483 486 525 -hsync -vsync (35.0 kHz) [ 28.791] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800= = 480 490 492 525 -hsync -vsync (31.5 kHz) [ 28.791] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900= = 400 412 414 449 -hsync +vsync (31.5 kHz) [ 28.791] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 144= 0 = 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 28.791] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 = 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [ 28.791] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 = 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 28.791] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 = 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 28.791] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 115= 2 = 624 625 628 667 -hsync -vsync (49.7 kHz) [ 28.791] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 105= 6 = 600 601 604 625 +hsync +vsync (46.9 kHz) [ 28.791] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 104= 0 = 600 637 643 666 +hsync +vsync (48.1 kHz) [ 28.791] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 = 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 28.791] (II) intel(0): Modeline "1280x1024"x76.0 141.82 1280 1376 15= 12 = 1744 1024 1025 1028 1070 -hsync +vsync (81.3 kHz) [ 28.791] (II) intel(0): Modeline "1280x1024"x72.0 132.75 1280 1368 15= 04 = 1728 1024 1025 1028 1067 -hsync +vsync (76.8 kHz) [ 28.791] (II) intel(0): Not using mode "1280x1024" (bad mode = clock/interlace/doublescan) [ 28.791] (II) intel(0): Printing probed modes for output VGA1 [ 28.791] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 14= 40 = 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 28.791] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 14= 40 = 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 28.791] (II) intel(0): Modeline "1280x1024"x72.0 132.84 1280 1368 15= 04 = 1728 1024 1025 1028 1067 -hsync +vsync (76.9 kHz) [ 28.792] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 134= 4 = 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 28.792] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 113= 6 = 1312 768 769 772 800 +hsync +vsync (60.1 kHz) [ 28.792] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 118= 4 = 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 28.792] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 118= 4 = 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 28.792] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 11= 52 = 624 625 628 667 -hsync -vsync (49.7 kHz) [ 28.792] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 10= 40 = 600 637 643 666 +hsync +vsync (48.1 kHz) [ 28.792] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 10= 56 = 600 601 604 625 +hsync +vsync (46.9 kHz) [ 28.792] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 10= 56 = 600 601 605 628 +hsync +vsync (37.9 kHz) [ 28.792] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 83= 2 = 480 489 491 520 -hsync -vsync (37.9 kHz) [ 28.792] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 84= 0 = 480 481 484 500 -hsync -vsync (37.5 kHz) [ 28.792] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 86= 4 = 480 483 486 525 -hsync -vsync (35.0 kHz) [ 28.792] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 80= 0 = 480 490 492 525 -hsync -vsync (31.5 kHz) [ 28.792] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 90= 0 = 400 412 414 449 -hsync +vsync (31.5 kHz) [ 28.792] (II) intel(0): Modeline "640x350"x70.1 25.17 640 656 752 80= 0 = 350 357 359 449 +hsync -vsync (31.5 kHz) [ 28.792] (II) intel(0): Output VGA1 connected [ 28.792] (II) intel(0): Using exact sizes for initial modes [ 28.792] (II) intel(0): Output VGA1 using initial mode 1280x1024 [ 28.792] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless = otherwise stated. [ 28.792] (II) intel(0): Kernel page flipping support detected, enabling [ 28.792] (**) intel(0): Display dimensions: (380, 300) mm [ 28.792] (**) intel(0): DPI set to (85, 86) [ 28.792] (II) Loading sub module "fb" [ 28.792] (II) LoadModule: "fb" [ 28.793] (II) Loading /usr/lib/xorg/modules/libfb.so [ 28.793] (II) Module fb: vendor=3D"X.Org Foundation" [ 28.793] compiled for 1.8.0, module version =3D 1.0.0 [ 28.793] ABI class: X.Org ANSI C Emulation, version 0.4 [ 28.793] (II) UnloadModule: "fbdev" [ 28.793] (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 28.794] (II) UnloadModule: "fbdevhw" [ 28.794] (II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so [ 28.794] (II) UnloadModule: "vesa" [ 28.794] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 28.794] (=3D=3D) Depth 24 pixmap format is 32 bpp [ 28.794] (II) intel(0): [DRI2] Setup complete [ 28.794] (II) intel(0): [DRI2] DRI driver: i915 [ 28.794] (**) intel(0): Tiling enabled [ 28.794] (**) intel(0): SwapBuffers wait enabled [ 28.794] (=3D=3D) intel(0): VideoRam: 131072 KB [ 28.794] (II) intel(0): Allocated new frame buffer 1280x1024 stride 819= 2, = tiled [ 28.794] (II) UXA(0): Driver registered support for the following = operations: [ 28.794] (II) solid [ 28.794] (II) copy [ 28.794] (II) composite (RENDER acceleration) [ 28.794] (II) put_image [ 28.794] (II) get_image [ 28.794] (=3D=3D) intel(0): Backing store disabled [ 28.794] (=3D=3D) intel(0): Silken mouse enabled [ 28.794] (II) intel(0): Initializing HW Cursor [ 28.856] (II) intel(0): RandR 1.2 enabled, ignore the following RandR = disabled message. [ 28.856] (=3D=3D) intel(0): DPMS enabled [ 28.856] (=3D=3D) intel(0): Intel XvMC decoder disabled [ 28.856] (II) intel(0): Set up overlay video [ 28.856] (II) intel(0): direct rendering: DRI2 Enabled [ 28.857] (--) RandR disabled [ 28.857] (II) Initializing built-in extension Generic Event Extension [ 28.857] (II) Initializing built-in extension SHAPE [ 28.857] (II) Initializing built-in extension MIT-SHM [ 28.857] (II) Initializing built-in extension XInputExtension [ 28.857] (II) Initializing built-in extension XTEST [ 28.857] (II) Initializing built-in extension BIG-REQUESTS [ 28.857] (II) Initializing built-in extension SYNC [ 28.857] (II) Initializing built-in extension XKEYBOARD [ 28.857] (II) Initializing built-in extension XC-MISC [ 28.857] (II) Initializing built-in extension SECURITY [ 28.857] (II) Initializing built-in extension XINERAMA [ 28.857] (II) Initializing built-in extension XFIXES [ 28.857] (II) Initializing built-in extension RENDER [ 28.857] (II) Initializing built-in extension RANDR [ 28.857] (II) Initializing built-in extension COMPOSITE [ 28.857] (II) Initializing built-in extension DAMAGE [ 28.882] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 28.882] (II) AIGLX: enabled GLX_INTEL_swap_event [ 28.882] (II) AIGLX: enabled GLX_SGI_make_current_read [ 28.882] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objec= ts [ 28.882] (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so [ 28.882] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 28.883] (II) intel(0): Setting screen physical size to 338 x 270 [ 29.092] (II) XKB: reuse xkmfile = /var/lib/xkb/compiled/server-8AA988DD479FAABEC4FC3CCCF4CC29B4948840B4.xkm [ 29.114] (II) config/udev: Adding input device Power Button = (/dev/input/event1) [ 29.115] (**) Power Button: Applying InputClass "evdev keyboard catchal= l" [ 29.115] (**) Power Button: Applying InputClass "LocalKeyboard" [ 29.115] (II) LoadModule: "evdev" [ 29.117] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 29.117] (II) Module evdev: vendor=3D"X.Org Foundation" [ 29.117] compiled for 1.8.0, module version =3D 2.4.0 [ 29.117] Module class: X.Org XInput Driver [ 29.117] ABI class: X.Org XInput driver, version 9.0 [ 29.117] (**) Power Button: always reports core events [ 29.117] (**) Power Button: Device: "/dev/input/event1" [ 29.118] (II) Power Button: Found keys [ 29.118] (II) Power Button: Configuring as keyboard [ 29.118] (II) XINPUT: Adding extended input device "Power Button" (type= : = KEYBOARD) [ 29.118] (**) Option "xkb_rules" "evdev" [ 29.118] (**) Option "xkb_model" "evdev" [ 29.118] (**) Option "xkb_layout" "de" [ 29.118] (**) Option "xkb_variant" "nodeadkeys" [ 29.118] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 29.125] (II) XKB: reuse xkmfile = /var/lib/xkb/compiled/server-3D86ED3B3259B9D0586E96CC233857E92CC5F57B.xkm [ 29.128] (II) config/udev: Adding input device Power Button = (/dev/input/event0) [ 29.128] (**) Power Button: Applying InputClass "evdev keyboard catchal= l" [ 29.128] (**) Power Button: Applying InputClass "LocalKeyboard" [ 29.128] (**) Power Button: always reports core events [ 29.128] (**) Power Button: Device: "/dev/input/event0" [ 29.128] (II) Power Button: Found keys [ 29.128] (II) Power Button: Configuring as keyboard [ 29.128] (II) XINPUT: Adding extended input device "Power Button" (type= : = KEYBOARD) [ 29.128] (**) Option "xkb_rules" "evdev" [ 29.128] (**) Option "xkb_model" "evdev" [ 29.128] (**) Option "xkb_layout" "de" [ 29.128] (**) Option "xkb_variant" "nodeadkeys" [ 29.128] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 29.131] (II) config/udev: Adding input device Logitech USB Receiver = (/dev/input/event3) [ 29.131] (**) Logitech USB Receiver: Applying InputClass "evdev keyboar= d = catchall" [ 29.131] (**) Logitech USB Receiver: Applying InputClass "LocalKeyboard" [ 29.131] (**) Logitech USB Receiver: always reports core events [ 29.131] (**) Logitech USB Receiver: Device: "/dev/input/event3" [ 29.131] (II) Logitech USB Receiver: Found keys [ 29.131] (II) Logitech USB Receiver: Configuring as keyboard [ 29.131] (II) XINPUT: Adding extended input device "Logitech USB Receiv= er" = (type: KEYBOARD) [ 29.131] (**) Option "xkb_rules" "evdev" [ 29.131] (**) Option "xkb_model" "evdev" [ 29.132] (**) Option "xkb_layout" "de" [ 29.132] (**) Option "xkb_variant" "nodeadkeys" [ 29.132] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 29.133] (II) config/udev: Adding input device Logitech USB Receiver = (/dev/input/event4) [ 29.133] (**) Logitech USB Receiver: Applying InputClass "evdev pointer = catchall" [ 29.133] (**) Logitech USB Receiver: Applying InputClass "evdev keyboar= d = catchall" [ 29.133] (**) Logitech USB Receiver: Applying InputClass "LocalKeyboard" [ 29.133] (**) Logitech USB Receiver: always reports core events [ 29.133] (**) Logitech USB Receiver: Device: "/dev/input/event4" [ 29.133] (II) Logitech USB Receiver: Found 12 mouse buttons [ 29.133] (II) Logitech USB Receiver: Found scroll wheel(s) [ 29.133] (II) Logitech USB Receiver: Found relative axes [ 29.133] (II) Logitech USB Receiver: Found x and y relative axes [ 29.133] (II) Logitech USB Receiver: Found absolute axes [ 29.133] (II) Logitech USB Receiver: Found keys [ 29.133] (II) Logitech USB Receiver: Configuring as mouse [ 29.133] (II) Logitech USB Receiver: Configuring as keyboard [ 29.133] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5 [ 29.133] (**) Logitech USB Receiver: EmulateWheelButton: 4, = EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 29.133] (II) XINPUT: Adding extended input device "Logitech USB Receiv= er" = (type: KEYBOARD) [ 29.133] (**) Option "xkb_rules" "evdev" [ 29.133] (**) Option "xkb_model" "evdev" [ 29.133] (**) Option "xkb_layout" "de" [ 29.134] (**) Option "xkb_variant" "nodeadkeys" [ 29.134] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 29.134] (**) Logitech USB Receiver: (accel) keeping acceleration schem= e 1 [ 29.134] (**) Logitech USB Receiver: (accel) acceleration profile 0 [ 29.134] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000 [ 29.134] (**) Logitech USB Receiver: (accel) acceleration threshold: 4 [ 29.134] (II) Logitech USB Receiver: initialized for relative axes. [ 29.134] (WW) Logitech USB Receiver: ignoring absolute axes. [ 29.135] (II) config/udev: Adding input device Logitech USB Receiver = (/dev/input/mouse0) [ 29.135] (**) Logitech USB Receiver: Applying InputClass "LocalKeyboard" [ 29.135] (EE) No input driver/identifier specified (ignoring) [ 29.149] (II) config/udev: Adding input device PC Speaker = (/dev/input/event2) [ 29.149] (EE) No input driver/identifier specified (ignoring) [ 35.960] (II) intel(0): EDID vendor "BNQ", prod id 30337 [ 35.960] (II) intel(0): Using hsync ranges from config file [ 35.960] (II) intel(0): Using vrefresh ranges from config file [ 35.960] (II) intel(0): Printing DDC gathered Modelines: [ 35.960] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 144= 0 = 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 35.961] (II) intel(0): Modeline "640x350"x0.0 25.17 640 656 752 800= = 350 387 389 449 +hsync -vsync (31.5 kHz) [ 35.961] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 105= 6 = 600 601 605 628 +hsync +vsync (37.9 kHz) [ 35.961] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840= = 480 481 484 500 -hsync -vsync (37.5 kHz) [ 35.961] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832= = 480 489 492 520 -hsync -vsync (37.9 kHz) [ 35.961] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864= = 480 483 486 525 -hsync -vsync (35.0 kHz) [ 35.961] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800= = 480 490 492 525 -hsync -vsync (31.5 kHz) [ 35.961] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900= = 400 412 414 449 -hsync +vsync (31.5 kHz) [ 35.961] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 144= 0 = 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 35.961] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 = 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [ 35.961] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 = 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 35.961] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 = 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 35.961] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 115= 2 = 624 625 628 667 -hsync -vsync (49.7 kHz) [ 35.961] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 105= 6 = 600 601 604 625 +hsync +vsync (46.9 kHz) [ 35.961] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 104= 0 = 600 637 643 666 +hsync +vsync (48.1 kHz) [ 35.961] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 = 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 35.961] (II) intel(0): Modeline "1280x1024"x76.0 141.82 1280 1376 15= 12 = 1744 1024 1025 1028 1070 -hsync +vsync (81.3 kHz) [ 35.961] (II) intel(0): Modeline "1280x1024"x72.0 132.75 1280 1368 15= 04 = 1728 1024 1025 1028 1067 -hsync +vsync (76.8 kHz) [ 36.083] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server- A9ACCDF38EB1446AC7992CE0B930842F0AD908B1.xkm [ 45.839] (II) XKB: reuse xkmfile = /var/lib/xkb/compiled/server-51837A4F2B29F46E2282DF3BB5395883027C8B05.xkm [ 59.680] (II) intel(0): EDID vendor "BNQ", prod id 30337 [ 59.680] (II) intel(0): Using hsync ranges from config file [ 59.680] (II) intel(0): Using vrefresh ranges from config file [ 59.680] (II) intel(0): Printing DDC gathered Modelines: [ 59.680] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 144= 0 = 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 59.680] (II) intel(0): Modeline "640x350"x0.0 25.17 640 656 752 800= = 350 387 389 449 +hsync -vsync (31.5 kHz) [ 59.680] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 105= 6 = 600 601 605 628 +hsync +vsync (37.9 kHz) [ 59.680] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840= = 480 481 484 500 -hsync -vsync (37.5 kHz) [ 59.680] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832= = 480 489 492 520 -hsync -vsync (37.9 kHz) [ 59.680] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864= = 480 483 486 525 -hsync -vsync (35.0 kHz) [ 59.680] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800= = 480 490 492 525 -hsync -vsync (31.5 kHz) [ 59.680] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900= = 400 412 414 449 -hsync +vsync (31.5 kHz) [ 59.680] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 144= 0 = 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 59.680] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 = 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [ 59.680] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 = 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 59.680] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 = 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 59.680] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 115= 2 = 624 625 628 667 -hsync -vsync (49.7 kHz) [ 59.680] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 105= 6 = 600 601 604 625 +hsync +vsync (46.9 kHz) [ 59.680] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 104= 0 = 600 637 643 666 +hsync +vsync (48.1 kHz) [ 59.680] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 = 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 59.680] (II) intel(0): Modeline "1280x1024"x76.0 141.82 1280 1376 15= 12 = 1744 1024 1025 1028 1070 -hsync +vsync (81.3 kHz) [ 59.681] (II) intel(0): Modeline "1280x1024"x72.0 132.75 1280 1368 15= 04 = 1728 1024 1025 1028 1067 -hsync +vsync (76.8 kHz) [ 87.512] (II) intel(0): EDID vendor "BNQ", prod id 30337 [ 87.512] (II) intel(0): Using hsync ranges from config file [ 87.512] (II) intel(0): Using vrefresh ranges from config file [ 87.512] (II) intel(0): Printing DDC gathered Modelines: [ 87.512] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 144= 0 = 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) [ 87.512] (II) intel(0): Modeline "640x350"x0.0 25.17 640 656 752 800= = 350 387 389 449 +hsync -vsync (31.5 kHz) [ 87.512] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 105= 6 = 600 601 605 628 +hsync +vsync (37.9 kHz) [ 87.512] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840= = 480 481 484 500 -hsync -vsync (37.5 kHz) [ 87.512] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832= = 480 489 492 520 -hsync -vsync (37.9 kHz) [ 87.512] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864= = 480 483 486 525 -hsync -vsync (35.0 kHz) [ 87.512] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800= = 480 490 492 525 -hsync -vsync (31.5 kHz) [ 87.512] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900= = 400 412 414 449 -hsync +vsync (31.5 kHz) [ 87.512] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 144= 0 = 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) [ 87.512] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 = 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [ 87.512] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 = 1328 768 771 777 806 -hsync -vsync (56.5 kHz) [ 87.512] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 = 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 87.512] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 115= 2 = 624 625 628 667 -hsync -vsync (49.7 kHz) [ 87.512] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 105= 6 = 600 601 604 625 +hsync +vsync (46.9 kHz) [ 87.512] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 104= 0 = 600 637 643 666 +hsync +vsync (48.1 kHz) [ 87.512] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 = 1600 864 865 868 900 +hsync +vsync (67.5 kHz) [ 87.512] (II) intel(0): Modeline "1280x1024"x76.0 141.82 1280 1376 15= 12 = 1744 1024 1025 1028 1070 -hsync +vsync (81.3 kHz) [ 87.512] (II) intel(0): Modeline "1280x1024"x72.0 132.75 1280 1368 15= 04 = 1728 1024 1025 1028 1067 -hsync +vsync (76.8 kHz) [ 234.488] (EE) intel(0): Detected a hung GPU, disabling acceleration. [ 234.600] (WW) intel(0): i830_uxa_prepare_access: gtt bo map failed: = Input/output error ------------8<----------8<---------------