From: linux@arm.linux.org.uk (Russell King - ARM Linux) Date: Wed, 1 Sep 2010 08:06:46 +0100 Subject: ARM: LPC32XX: Various minor fixes and updates In-Reply-To: References: <1282174859-8780-1-git-send-email-wellsk40@gmail.com> Message-ID: <20100901070646.GB8142@n2100.arm.linux.org.uk> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, Aug 20, 2010 at 03:16:17PM -0700, Kevin Wells wrote: > > > > [PATCH 1/6] ARM: LPC32XX: Fix several clock device ID strings > > [PATCH 2/6] ARM: LPC32XX: Fix naming convention issues with some defines > > [PATCH 3/6] ARM: LPC32xx: Fix gpiolib bit mask macro > > [PATCH 4/6] ARM: LPC32xx: Remove MMC peripheral clock enable/disable code > > [PATCH 5/6] ARM: LPC32XX: Remove clock enable code for AMBA driver > > [PATCH 6/6] ARM: LPC32XX: Add board.h for platform_data structures > > > > Sorry about the lack of info on changed with this patchset. > This is a v2 update to the v1 patchset. The title should of indicated that :( > v1 was originally posted July 29 (ARM: LPC32xx: Misc arch updates and fixes) > > Unchanged from v1: > LPC definition fixes > Fix GPIO 3 IN bit mask > Remove un-needed local MMC clock enable code > Fix up I2S device ID name for clock registration > > Changed from v1: > Remove un-needed code from IRQ ack handler > The problem this patch fixed needs more investigation, so > there's no point > in putting in a partial fix > Change AMBA pre and post clock init for AMBA registration > No longer needed with amba clocking fix > Add a workaround for LCD register access prior to clock enable > No longer needed with amba clocking fix > > Additions in v2: > Changed the touch screen clock device ID name to match &pdev->dev per > the driver currently under review > Added board.h file and platform data for touch screen controller and > key scanner interface > > I sneaked the additions in this series so I can move forward with the > tsc changes. This patch set looks fine to me.