From: Guillem Jover Date: Fri, 03 Sep 2010 03:01:32 +0000 Subject: [lm-sensors] [PATCH 2/2] hwmon: (f75375s) Do not overwrite values Message-Id: <20100903030132.GA16049@gaara.hadrons.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Riku Voipio Cc: lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org All bits in the values read from registers to be used for the next write were getting overwritten, avoid doing so to not mess with the current configuration. Signed-off-by: Guillem Jover --- drivers/hwmon/f75375s.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c index e5828c0..9638d58 100644 --- a/drivers/hwmon/f75375s.c +++ b/drivers/hwmon/f75375s.c @@ -298,7 +298,7 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val) return -EINVAL; fanmode = f75375_read8(client, F75375_REG_FAN_TIMER); - fanmode = ~(3 << FAN_CTRL_MODE(nr)); + fanmode &= ~(3 << FAN_CTRL_MODE(nr)); switch (val) { case 0: /* Full speed */ @@ -350,7 +350,7 @@ static ssize_t set_pwm_mode(struct device *dev, struct device_attribute *attr, mutex_lock(&data->update_lock); conf = f75375_read8(client, F75375_REG_CONFIG1); - conf = ~(1 << FAN_CTRL_LINEAR(nr)); + conf &= ~(1 << FAN_CTRL_LINEAR(nr)); if (val = 0) conf |= (1 << FAN_CTRL_LINEAR(nr)) ; -- 1.7.1 _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors