From: Jean Delvare Date: Sun, 05 Sep 2010 16:45:22 +0000 Subject: Re: [lm-sensors] [PATCH 1/2] hwmon: (f75375s) Shift control mode to Message-Id: <20100905184522.0825f390@hyperion.delvare> List-Id: References: <20100903025459.GA15996@gaara.hadrons.org> In-Reply-To: <20100903025459.GA15996@gaara.hadrons.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Guillem Jover Cc: Riku Voipio , linux-kernel@vger.kernel.org, lm-sensors@lm-sensors.org Hi Guillem, On Fri, 3 Sep 2010 04:54:59 +0200, Guillem Jover wrote: > The spec notes that fan0 and fan1 control mode bits are located in bits > 7-6 and 5-4 respectively, but the FAN_CTRL_MODE macro was making the > bits shift by 5 instead of by 4. > > Signed-off-by: Guillem Jover > --- > drivers/hwmon/f75375s.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c > index 0f58ecc..e5828c0 100644 > --- a/drivers/hwmon/f75375s.c > +++ b/drivers/hwmon/f75375s.c > @@ -79,7 +79,7 @@ enum chips { f75373, f75375 }; > #define F75375_REG_PWM2_DROP_DUTY 0x6C > > #define FAN_CTRL_LINEAR(nr) (4 + nr) > -#define FAN_CTRL_MODE(nr) (5 + ((nr) * 2)) > +#define FAN_CTRL_MODE(nr) (4 + ((nr) * 2)) > > /* > * Data structures and manipulation thereof Good catch, patch applied, thanks. Note though that it seems that this driver needs some more love in this area. Struct f75375_data has a member fan_timer to which the contents of register 0x60 (F75375_REG_FAN_TIMER) is written in f75375_update_device(), but this value isn't used anywhere. Secondly, struct member pwm_mode is _not_ initialized anywhere, although show_pwm_mode() exports it to user-space. And member pwm_enable is worse, the fans are set to full speed arbitrarily when the driver is loaded (in function f75375_init()), which is bad practice. So there is definitely room for cleanups and improvements, if you are interested in this driver. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors