From: Felipe Balbi Subject: Re: Suspend to RAM broken on BeagleBoard ? Date: Sat, 11 Sep 2010 17:21:53 +0300 Message-ID: <20100911142152.GA2547@legolas.emea.dhcp.ti.com> References: <20100910174814.6e5d439e@surf> <20100910170053.GB2230@legolas.emea.dhcp.ti.com> <20100910204713.61e002bc@surf> Reply-To: balbi@ti.com Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Return-path: Received: from devils.ext.ti.com ([198.47.26.153]:42068 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752765Ab0IKOV5 (ORCPT ); Sat, 11 Sep 2010 10:21:57 -0400 Content-Disposition: inline In-Reply-To: <20100910204713.61e002bc@surf> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Thomas Petazzoni Cc: "Balbi, Felipe" , "linux-omap@vger.kernel.org" Hi, On Fri, Sep 10, 2010 at 01:47:13PM -0500, Thomas Petazzoni wrote: >> On Fri, Sep 10, 2010 at 10:48:14AM -0500, Thomas Petazzoni wrote: >> >I also have a problem with USB support, both on linux-omap and >> >Kevin's pm-core branch. My USB Ethernet adapter, supported by the >> >asix driver, isn't detected anymore. With a pm git tree of a couple >> >of weeks ago, it was working. This is again with just a plain >> >omap3_defconfig. >> >> is it attached to EHCI/OHCI or musb port ? > >It's a normal USB Ethernet adapter that is attached to the EHCI/OCHI >port of the BeagleBoard. I have a revision C3. Would you have any debugging dumps to share ? What shows up on dmesg after you attach the device ? (please clear the message ring buffer before attaching the device with dmesg -c). -- balbi