From: Wolfgang Denk Date: Sun, 12 Sep 2010 21:28:29 +0200 Subject: [U-Boot] Patches to support Ramtron SPI FRAMs In-Reply-To: <4C8D2729.2080800@emk-elektronik.de> References: <1284302113-7939-1-git-send-email-u-boot@emk-elektronik.de> <20100912144229.6748015242D@gemini.denx.de> <4C8CF3FF.1040806@emk-elektronik.de> <20100912174114.20B1215242D@gemini.denx.de> <4C8D212F.2010503@emk-elektronik.de> <20100912190607.B3D5E15242D@gemini.denx.de> <4C8D2729.2080800@emk-elektronik.de> Message-ID: <20100912192829.532F7135156@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Reinhard Meyer, In message <4C8D2729.2080800@emk-elektronik.de> you wrote: > > >> Thanks. Way too simple to see the dots through a big redwood board. > >> (though I'd use HEAD~8..HEAD~7) > > > > This would give you only a single patch, representing the commit at > > HEAD~7 > > Thanks for clarifying! Interesting logic, however ;) In which way "interesting"? A commit represents a state. A patch represents a change from one state into another one, so it seems logical to me that you hve to specify the "from commit" and the "to commit" IDs. > I had used that one. It just seemed awkward to have a text editor open > and then to read a file into it... export EDITOR=/bin/cat ? ;-) Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The world is coming to an end -- save your buffers!