From: Wolfgang Denk Date: Wed, 15 Sep 2010 15:17:31 +0200 Subject: [U-Boot] RAM memory verification on boot In-Reply-To: <949874.43970.qm@web120217.mail.ne1.yahoo.com> References: <949874.43970.qm@web120217.mail.ne1.yahoo.com> Message-ID: <20100915131731.A751F15242D@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear ethan paddloch, In message <949874.43970.qm@web120217.mail.ne1.yahoo.com> you wrote: > > I am currently using u-boot version 1.1.6 on a powerpc embedded device whic > h have increased from 64Mbyte RAM memory to 128Mbye size length. > The problem is that my device does not recognize the 128Mbyte keeping the o > riginal 64Mbyte length. > Does anyone know how to let u-boot and the linux bsp to recognize the new m > emory length? It seems your port does not initialize the RAM correctly. The recommended approach is to use get_ram_size() to automatically adjust to the actual RAM memory size on the system. Note that U-Boot 1.1.6 is more than 4.5 years old. An update to the recent version is *strongly* recommended. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "In matrimony, to hesitate is sometimes to be saved." - Butler