From: Mark Brown Subject: Re: [PATCH] ASoC: tlv320aic3x: Add virtual output pin Detection Date: Fri, 17 Sep 2010 14:00:11 +0100 Message-ID: <20100917130011.GH4322@rakim.wolfsonmicro.main> References: <1284723541-21813-1-git-send-email-jhnikula@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from opensource2.wolfsonmicro.com (opensource.wolfsonmicro.com [80.75.67.52]) by alsa0.perex.cz (Postfix) with ESMTP id BBBB5103980 for ; Fri, 17 Sep 2010 15:00:17 +0200 (CEST) Content-Disposition: inline In-Reply-To: <1284723541-21813-1-git-send-email-jhnikula@gmail.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Jarkko Nikula Cc: alsa-devel@alsa-project.org, Liam Girdwood List-Id: alsa-devel@alsa-project.org On Fri, Sep 17, 2010 at 02:39:01PM +0300, Jarkko Nikula wrote: > Purpose of this virtual Detection pin is to keep codec bias on whenever the > GPIO or jack detection features are needed. > > Jack detection needs a mic bias so machine drivers can construct a following > route for instance for keeping the path and codec bias on: > "Input Jack" -> "Mic Bias xV" -> "Detection" -> detection block inside codec. > For the GPIO the machine driver can force the pin on with > snd_soc_dapm_force_enable_pin. > Signed-off-by: Jarkko Nikula Acked-by: Mark Brown