From: Wolfgang Denk Date: Fri, 24 Sep 2010 19:43:40 +0200 Subject: [U-Boot] [PATCH] ppc44x: config GPIOs for USB on canyonlands board In-Reply-To: References: <201009231421.o8NELOE9022250@amcc.com> <20100923185627.0A76DB7164@gemini.denx.de> <11e252f5c85bf4cf5f8e7c0067c8bb5a@mail.gmail.com> Message-ID: <20100924174340.500C4EC2339@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Feng Kan, In message you wrote: > > FKAN: Dear Wolfgang, is the symmetry needed here? If a user > plan to use the usb, he will trigger the function. Otherwise, on > a stop what value would we put it back to. Design rules say: Shall initialize only such peripherals used by U-Boot itself, and must deinitialize them after use. Note that especially the deinitialization is mandatory! Isn't this GPI reset to the initial values part of the deinitialization sequence? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The software required `Windows 95 or better', so I installed Linux.