From: Wolfgang Denk Date: Sun, 26 Sep 2010 16:37:07 +0200 Subject: [U-Boot] [PATCH] ARMV7: OMAP4: Calculate SDRAM size In-Reply-To: <4C9F3E4F.3040403@gmail.com> References: <1285276376.21276.30.camel@quadra> <4C9E0E7E.7090900@gmail.com> <4C9F3E4F.3040403@gmail.com> Message-ID: <20100926143707.AFC3E134F52@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Nishanth Menon, In message <4C9F3E4F.3040403@gmail.com> you wrote: > > > I think you are referring to SDRAM initialization. Yes, it is assumed > > that SDRAM initialization(at least the DMM part of it) is done before > > the call to sdram_size(). The right location for this seems > > to be the initial part of sdram_init(). > > thanks for the clarification.. NOR boot is usually going to have initial > part in XIP -> we'd traditionally relocate to SDRAM before the call to > sdram_size() happens. Yes, this was the way how many ARM boards id, and this is what I'm trying to explain: this is WRONG. SDRAM configuration must be done while still running from NOR, i. e. before relocation. Only then free reconfiguration, auto-sizing etc. is possible. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de ... The prejudices people feel about each other disappear when then get to know each other. -- Kirk, "Elaan of Troyius", stardate 4372.5