From: Wolfgang Denk Date: Wed, 29 Sep 2010 22:51:06 +0200 Subject: [U-Boot] u-boot boot sequence In-Reply-To: <201009292233.04020.korgull@home.nl> References: <201009270011.32850.korgull@home.nl> <20100927072536.A4DDFB7164@gemini.denx.de> <201009292233.04020.korgull@home.nl> Message-ID: <20100929205106.11B0BD2B484@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Marcel, In message <201009292233.04020.korgull@home.nl> you wrote: > > > see tools/env for tools to read and write the U-Boot environment > > settings from Linux. This can be used to change the boot command, boot > > delay etc. > > I used an AVR processor before and did this in the environment settings but > currently that doesn't work for me yet. > My env is in nor flash and I don't have a driver in linux yet to communicate > with it. I'll look into this. Linux MTD drivers for NOR flash are really standard; they should work out of the box on all architectures. > Currently I write settings to eeprom but have no idea if it can be read from > u-boot. I currently only use it for items that I need in Linux. I did see some Yes, you can do this. Use the "eeprom read" (or raw "i2c" commands) to read the eemprom content into RAM; then you can use "env import" to import it into the environment. Or you can combine "env export" with "eeprom write" for the opposite direction. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "Who is the oldest inhabitant of this village?" "We haven't got one; we had one, but he died three weeks ago."