From: Wolfgang Denk Date: Thu, 30 Sep 2010 19:54:33 +0200 Subject: [U-Boot] [PATCH 13/17] post/i2c: Add ability to ignore I2C devices In-Reply-To: <1285868400.28947.19878.camel@petert> References: <1285787156-6005-1-git-send-email-ptyser@xes-inc.com> <1285787156-6005-13-git-send-email-ptyser@xes-inc.com> <4CA429E8.8040306@denx.de> <1285828543.20234.5.camel@ptyser-laptop> <20100930074447.A3700D2B480@gemini.denx.de> <1285851649.22004.5.camel@ptyser-laptop> <20100930172124.5360C134F56@gemini.denx.de> <1285868400.28947.19878.camel@petert> Message-ID: <20100930175433.BF944134F56@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Peter Tyser, In message <1285868400.28947.19878.camel@petert> you wrote: > > So the IGNORE_LIST is intended for devices that may or may not be > > present, and neither state is considered an error? > > Correct. And also for devices that may or may not be present, but are > impossible to determine if they should/shouldn't be present, so its > impossible to determine what an error case is (if that makes sense...). > > I gave a few examples in the original patch of when this might be > useful. Most of the examples could be better solved by a more > complicated, dynamically generated I2C_ADDR_LIST (eg detect if an XMC > card is present, and if so, add device 0x50 to the list of expected > devices), but it seems like overkill for a simple POST. Now I understand your intention. I didn't when reading the description in the initial commit message. Maybe you can make this a bit more explicit for slow thinkers like me. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Monday is an awful way to spend one seventh of your life.