From: Marcel Date: Sat, 2 Oct 2010 01:53:41 +0200 Subject: [U-Boot] USB host on the AT91sam9g45 In-Reply-To: <201009302343.08924.korgull@home.nl> References: <201009302343.08924.korgull@home.nl> Message-ID: <201010020153.42178.korgull@home.nl> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, Sorry to top post, but I think it is fine in this case (no replies on my own message yet). I have got USB host working on the AT91sam9g45. The board I'm using is from in-circuit ( http://www.ic- board.de/product_info.php?info=p125_STK-ADB1000-SAM9G45-OEM-5inchTFT.html ). In specific I'm using their ICnova SAM9G45 OEM board and also tested using the ADB1000 main board. It works with all brands of mass storage devices I have in house, so that's great. It does however seem to operate only at full speed (not in Linux though) and although that's not a very big issue, I wonder if there's a reason for it (I don't see EHCI being configured anywhere yet). This is what the device tree looks like : Device Tree: 1 Hub (12 Mb/s, 0mA) | OHCI Root Hub | +-2 Mass Storage (12 Mb/s, 100mA) CBM Flash Disk 25112500B9281506 Since the Hub shows OHCI, I wonder if I need to enable something to allow EHCI or whether it's a HUB implementation issue. I tried CONFIG_USB_EHCI, but no change. Any comment on this ? Can it work in high speed mode or has this not been tested yet ? Unfortunately I changed a few things along the way and tried many times to just "make" without success. Finally after a "make clean" and "make" things worked fine. So, I'll need to clean up things before I can commit a patch and know why initially it didn't work. That shouldn't be too difficult though from a working state. My goal is to get USB device working too (actually my main goal) and commit the whole thing after I have that working as well. The main issue is however that I have just a couple of days left to get it done this month (otherwise I will continue next month). I do have all USB device functions implemented but somehow have no response (hooked up a USB analyser and see absolutely zero). I enabled CDC and it seems to run through all functions just fine. It does look like I'm close to getting it to work, but my guess is I miss some very basic setting of the G45. If someone has an idea, please let me know as I think I may be looking for the solution for a while otherwise (not an issue but a fact I guess ;-) ). Best regards, Marcel > Hi, > > I wonder if anyone has used USB host on the AT91sam9g45. > > In current u-boot-usb, USB host can be configured, but I can't make it > work. I used the configuration from the AT91sam9m10g45 regarding the USB > host part. > > It does the following (usb storage device is attached) > > Sam9> usb start > (Re)start USB... > USB: scanning bus for devices... 1 USB Device(s) found > scanning bus for storage devices... 0 Storage Device(s) found > Sam9> usb info > 1: Hub, USB Revision 1.10 > - OHCI Root Hub > - Class: Hub > - PacketSize: 8 Configurations: 1 > - Vendor: 0x0000 Product 0x0000 Version 0.0 > Configuration: 1 > - Interfaces: 1 Self Powered 0mA > Interface: 0 > - Alternate Setting 0, Endpoints: 1 > - Class Hub > - Endpoint 1 In Interrupt MaxPacket 2 Interval 255ms > > Below are the related config items : > > #define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ > #define CONFIG_ICNOVA_ARM9 1 /* It's an ICnova SAM9G45 OEM boardR */ > #define CONFIG_AT91SAM9G45 1 /* It's an Atmel AT91SAM9G45 SoC */ > #define CONFIG_AT91_LEGACY 1 /* needed for some defines */ > #define CONFIG_ARCH_CPU_INIT > #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ > > /* USB */ > #define CONFIG_USB_ATMEL 1 > #define CONFIG_USB_OHCI_NEW 1 > #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 > #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 > #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45" > #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 > #define CONFIG_DOS_PARTITION 1 > #define CONFIG_USB_STORAGE 1 > > Any ideas what I can check ? > > Best regards, > Marcel > > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot