From: Wolfgang Denk Date: Tue, 05 Oct 2010 07:30:17 +0200 Subject: [U-Boot] [RFC] [PATCH] arm: arm926ejs: use ELF relocations In-Reply-To: <4CAA50AA.3000608@free.fr> References: <1286229705-16019-1-git-send-email-albert.aribaud@free.fr> <4CAA50AA.3000608@free.fr> Message-ID: <20101005053017.324B51539A0@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Albert ARIBAUD, In message <4CAA50AA.3000608@free.fr> you wrote: > > Remember: this patch only applies to boards which boot from NOR FLASH! > You can test it on other types of boards (NAND-based, etc) for > regression testing, but nothing more. Assuming the NAND loder does not load U-Boot to it's final location at the upper end of RAM, but - say - somewhere in lower memory, the standard relocation preocess will be running, so I think there should be no real difference between (such) NAND booting systems and NOR booting ones - or am I missing something? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de If you use modules, you pay the price. Sane embedded solutions running in "tight" environments don't use modules :-) -- Benjamin Herrenschmidt in <1258234866.2140.451.camel@pasglop>