From: Wolfgang Denk Date: Sun, 10 Oct 2010 11:18:55 +0200 Subject: [U-Boot] [PATCHv2 3/3] OMAP3: Add support for the IGEP v2 board. In-Reply-To: <1286699659-2952-4-git-send-email-eballetbo@gmail.com> References: <1286699659-2952-1-git-send-email-eballetbo@gmail.com> <1286699659-2952-4-git-send-email-eballetbo@gmail.com> Message-ID: <20101010091855.541491508A2@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Enric Balletbo i Serra, In message <1286699659-2952-4-git-send-email-eballetbo@gmail.com> you wrote: > The IGEP v2 board is a low-cost, fan-less and industrial temperature > range single board computer that unleashes laptop-like performance and > expandability without the bulk, expense, or noise of typical desktop > machines. Its architecture shares much in common with other OMAP3 boards. > > Signed-off-by: Enric Balletbo i Serra > --- > MAKEALL | 1 + > board/isee/igep0020/Makefile | 49 +++++++++ > board/isee/igep0020/config.mk | 33 ++++++ > board/isee/igep0020/igep0020.c | 128 ++++++++++++++++++++++ > board/isee/igep0020/igep0020.h | 156 +++++++++++++++++++++++++++ > boards.cfg | 1 + > include/configs/igep0020.h | 228 ++++++++++++++++++++++++++++++++++++++++ > 7 files changed, 596 insertions(+), 0 deletions(-) > create mode 100644 board/isee/igep0020/Makefile > create mode 100644 board/isee/igep0020/config.mk > create mode 100644 board/isee/igep0020/igep0020.c > create mode 100644 board/isee/igep0020/igep0020.h > create mode 100644 include/configs/igep0020.h Entry to MAINTAINERS missing. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Fascinating, a totally parochial attitude. -- Spock, "Metamorphosis", stardate 3219.8