From: Wolfgang Denk Date: Mon, 11 Oct 2010 10:23:22 +0200 Subject: [U-Boot] [GIT PULL] Pull request: u-boot-imx In-Reply-To: <4CAD8492.3000702@denx.de> References: <4CAD8492.3000702@denx.de> Message-ID: <20101011082322.EBF8C151F66@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Stefano Babic, In message <4CAD8492.3000702@denx.de> you wrote: > Hi Wolfgang, > > please pull from u-boot-imx. > > The following changes since commit 2e6e1772c0e34871769be4aef79748fe3e47d953: > Wolfgang Denk (1): > Merge branch 'next' of /home/wd/git/u-boot/next > > are available in the git repository at: > > git://git.denx.de/u-boot-imx master > > Stefano Babic (10): > Use common function to set GPIOs for MX3 and MX5 > ARM: Use syslib functions for all CORTEXA8 > MX51: Added pins definition to set up pads > MX51: add structure to access System Reset Controller > MXC: Add watchdog support to serial driver > MX51: Drop unused header file for mx51evk > MXC: Correct SPI_CPOL setting in SPI driver > MXC: Fix byte-ordering in SPI driver for i.MX31/i.MX51 > MX51: Register definitions cannot be included in board config file > MX51: Support for TTECH vision2 board > > MAINTAINERS | 1 + > arch/arm/cpu/armv7/Makefile | 3 +- > arch/arm/cpu/armv7/omap-common/Makefile | 1 - > arch/arm/cpu/armv7/{omap-common => }/syslib.c | 0 > arch/arm/include/asm/arch-mx31/mx31-regs.h | 14 +- > arch/arm/include/asm/arch-mx31/mx31.h | 25 - > arch/arm/include/asm/arch-mx51/imx-regs.h | 26 +- > arch/arm/include/asm/arch-mx51/mx51_pins.h | 44 ++ > arch/arm/include/asm/arch-mx51/sys_proto.h | 1 + > board/davedenx/qong/qong.c | 29 +- > board/freescale/mx51evk/mx51evk.c | 2 - > board/ttcontrol/vision2/Makefile | 48 ++ > board/ttcontrol/vision2/config.mk | 25 + > board/ttcontrol/vision2/imximage_hynix.cfg | 209 ++++++ > board/ttcontrol/vision2/vision2.c | 711 > ++++++++++++++++++++ > boards.cfg | 1 + > drivers/gpio/Makefile | 2 +- > drivers/gpio/{mx31_gpio.c => mxc_gpio.c} | 47 +- > drivers/misc/fsl_pmic.c | 10 +- > drivers/serial/serial_mxc.c | 7 +- > drivers/spi/mxc_spi.c | 168 ++++-- > include/configs/imx31_litekit.h | 4 +- > include/configs/imx31_phycore.h | 2 +- > include/configs/mx31ads.h | 4 +- > include/configs/mx31pdk.h | 4 +- > include/configs/mx51evk.h | 2 +- > include/configs/qong.h | 6 +- > include/configs/vision2.h | 214 ++++++ > include/mc13892.h | 3 + > .../mx51evk/mx51evk.h => include/mxc_gpio.h | 50 +- > 30 files changed, 1510 insertions(+), 153 deletions(-) > rename arch/arm/cpu/armv7/{omap-common => }/syslib.c (100%) > create mode 100644 board/ttcontrol/vision2/Makefile > create mode 100644 board/ttcontrol/vision2/config.mk > create mode 100644 board/ttcontrol/vision2/imximage_hynix.cfg > create mode 100644 board/ttcontrol/vision2/vision2.c > rename drivers/gpio/{mx31_gpio.c => mxc_gpio.c} (63%) > create mode 100644 include/configs/vision2.h > rename board/freescale/mx51evk/mx51evk.h => include/mxc_gpio.h (54%) Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "Though a program be but three lines long, someday it will have to be maintained." - The Tao of Programming