From: Wolfgang Denk Date: Tue, 12 Oct 2010 22:45:38 +0200 Subject: [U-Boot] [PATCH 3/4] a4m072: led display support In-Reply-To: <1284066214-749-4-git-send-email-yanok@emcraft.com> References: <1284066214-749-1-git-send-email-yanok@emcraft.com> <1284066214-749-2-git-send-email-yanok@emcraft.com> <1284066214-749-3-git-send-email-yanok@emcraft.com> <1284066214-749-4-git-send-email-yanok@emcraft.com> Message-ID: <20101012204538.1DF9C151F66@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Ilya Yanok, In message <1284066214-749-4-git-send-email-yanok@emcraft.com> you wrote: > This patch adds support for LED display on a4m072 board. Hardware is > capable of displaying only one symbol at any time. We support displaying > two symbols in software (via blinking). > > Signed-off-by: Ilya Yanok > --- > board/a4m072/a4m072.c | 174 ++++++++++++++++++++++++++++++++++++++++++++++ > include/configs/a4m072.h | 12 +++- > 2 files changed, 184 insertions(+), 2 deletions(-) Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de One does not thank logic. -- Sarek, "Journey to Babel", stardate 3842.4