From: Jean Delvare Date: Wed, 20 Oct 2010 16:46:40 +0000 Subject: Re: [lm-sensors] [PATCH] drivers/hwmon: Use pr_fmt and pr_ Message-Id: <20101020184640.0df26e35@endymion.delvare> List-Id: References: <1287530020.10409.594.camel@Joe-Laptop> <20101020032938.GA20095@ericsson.com> <1287545658.10409.606.camel@Joe-Laptop> <20101020035346.GA20178@ericsson.com> <1287547662.10409.618.camel@Joe-Laptop> <20101020093438.07b129c8@endymion.delvare> <20101020144608.GA21937@ericsson.com> <20101020183835.202989c9@endymion.delvare> <20101020164343.GA22572@ericsson.com> In-Reply-To: <20101020164343.GA22572@ericsson.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Guenter Roeck Cc: Joe Perches , Hans de Goede , Alistair John Strachan , Henrik Rydberg , "Mark M. Hoffman" , Luca Tettamanti , Fenghua Yu , Juerg Haefliger , Eric Piel , Jim Cromie , Roger Lucas , "lm-sensors@lm-sensors.org" , LKML On Wed, 20 Oct 2010 09:43:43 -0700, Guenter Roeck wrote: > On Wed, Oct 20, 2010 at 12:38:35PM -0400, Jean Delvare wrote: > > But first of all, I really would like the pr_fmt issue do be sorted > > out. I don't like the idea of having to redefine it in every driver, > > when it seems easy to avoid that. Joe? > > Agreed, especially since it doesn't seem to be used in many of the drivers. As I understand it, it's used silently by all pr_*() calls. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors