From: Alexander Stein Date: Mon, 1 Nov 2010 12:05:41 +0100 Subject: [U-Boot] [PATCH 02/11] at91: Add USART & DBGU base address defines In-Reply-To: <9BA22C37-6EAE-478E-9FE2-3E98695C4D5F@googlemail.com> References: <1288600195-6960-1-git-send-email-alexander.stein@systec-electronic.com> <1288600195-6960-3-git-send-email-alexander.stein@systec-electronic.com> <9BA22C37-6EAE-478E-9FE2-3E98695C4D5F@googlemail.com> Message-ID: <201011011206.06458.alexander.stein@systec-electronic.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Andreas, On Monday 01 November 2010, 11:57:14 Andreas Bie?mann wrote: > Am 01.11.2010 um 09:29 schrieb Alexander Stein: > > Signed-off-by: Alexander Stein > > --- > > arch/arm/include/asm/arch-at91/at91cap9.h | 12 ++++++++---- > > arch/arm/include/asm/arch-at91/at91sam9260.h | 7 +++++++ > > arch/arm/include/asm/arch-at91/at91sam9261.h | 4 ++++ > > arch/arm/include/asm/arch-at91/at91sam9263.h | 3 +++ > > arch/arm/include/asm/arch-at91/at91sam9g45.h | 5 +++++ > > arch/arm/include/asm/arch-at91/at91sam9rl.h | 4 ++++ > > 6 files changed, 31 insertions(+), 4 deletions(-) > > > > --- a/arch/arm/include/asm/arch-at91/at91sam9g45.h > > +++ b/arch/arm/include/asm/arch-at91/at91sam9g45.h > > @@ -51,9 +51,14 @@ > > #define AT91SAM9G45_ID_VDEC 30 /* Video Decoder */ > > #define AT91SAM9G45_ID_IRQ0 31 /* Advanced Interrupt Controller */ > > > > +#define AT91_USART0_BASE 0xfff8c000 > > +#define AT91_USART1_BASE 0xfff90000 > > +#define AT91_USART2_BASE 0xfff94000 > > +#define AT91_USART3_BASE 0xfff98000 > > #define AT91_EMAC_BASE 0xfffbc000 > > #define AT91_SMC_BASE 0xffffe800 > > #define AT91_MATRIX_BASE 0xffffea00 > > +#define AT91_DBGU_BASE 0xffffee00 > > #define AT91_PIO_BASE 0xfffff200 > > #define AT91_PMC_BASE 0xfffffc00 > > #define AT91_RSTC_BASE 0xfffffd00 > > diff --git a/arch/arm/include/asm/arch-at91/at91sam9rl.h > > b/arch/arm/include/asm/arch-at91/at91sam9rl.h index 8eb0d4f..ffa6687 > > 100644 > > > > > > --- a/arch/arm/include/asm/arch-at91/at91sam9rl.h > > +++ b/arch/arm/include/asm/arch-at91/at91sam9rl.h > > @@ -44,6 +44,10 @@ > > #define AT91SAM9RL_ID_AC97C 24 /* AC97 Controller */ > > #define AT91SAM9RL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0) */ > > > > +#define AT91_US0_BASE 0xfffb0000 > > +#define AT91_US1_BASE 0xfffb4000 > > +#define AT91_US2_BASE 0xfffb8000 > > +#define AT91_US3_BASE 0xfffbc000 > > #define AT91_SDRAMC_BASE 0xffffea00 > > #define AT91_SMC_BASE 0xffffec00 > > #define AT91_MATRIX_BASE 0xffffee00 > > can we just use one naming scheme here? I dunno whether it should be > AT91_USx or AT91_USARTx but it should be the same in any case. Yes, sure. I justed copied the dfine and reworded it to match the AT91_$COMPONENT_BASE scheme. Always using USARTx is fine though. Best regards, Alexander Stein