From: Wolfgang Denk Date: Sun, 14 Nov 2010 23:48:45 +0100 Subject: [U-Boot] [PATCH/RFC 4/6] pci: Clean up PCI info when CONFIG_PCI_SCAN_SHOW In-Reply-To: <1288393169-9814-4-git-send-email-ptyser@xes-inc.com> References: <1288393169-9814-1-git-send-email-ptyser@xes-inc.com> <1288393169-9814-4-git-send-email-ptyser@xes-inc.com> Message-ID: <20101114224845.5ED2D134FEF@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Peter Tyser, In message <1288393169-9814-4-git-send-email-ptyser@xes-inc.com> you wrote: > This change does the following: > - Removes the printing of the PCI interrupt line value. This is > normally set to 0 by U-Boot on bootup and is rarely used during > everyday operation. > > - Prints out the PCI function number of a device. Previously a device > with multiple functions would be printed identically 2 times, which is > generally confusing. For example, on an Intel 2 port gigabit Ethernet > card the following was displayed: > ... > 04 01 8086 1010 0200 00 > 04 01 8086 1010 0200 00 > ... > > - Prints a text description of each device's PCI class instead of the > raw PCI class code. The textual description makes it much easier to > determine what devices are installed on a PCI bus. > > - Changes the general formatting of the PCI device output. > > Previous output: > PCIE1: connected as Root Complex > 04 01 8086 1010 0200 00 > 04 01 8086 1010 0200 00 > 03 00 10b5 8112 0604 00 > 02 01 10b5 8518 0604 00 > 02 02 10b5 8518 0604 00 > 08 00 1957 0040 0b20 00 > 07 00 10b5 8518 0604 00 > 09 00 10b5 8112 0604 00 > 07 01 10b5 8518 0604 00 > 07 02 10b5 8518 0604 00 > 06 00 10b5 8518 0604 00 > 02 03 10b5 8518 0604 00 > 01 00 10b5 8518 0604 00 > PCIE1: Bus 00 - 0b > PCIE2: connected as Root Complex > 0d 00 1957 0040 0b20 00 > PCIE2: Bus 0c - 0d > > Updated output: > PCIE1: connected as Root Complex > 04:01.0 - 8086:1010 - Network controller > 04:01.1 - 8086:1010 - Network controller > 03:00.0 - 10b5:8112 - Bridge device > 02:01.0 - 10b5:8518 - Bridge device > 02:02.0 - 10b5:8518 - Bridge device > 08:00.0 - 1957:0040 - Processor > 07:00.0 - 10b5:8518 - Bridge device > 09:00.0 - 10b5:8112 - Bridge device > 07:01.0 - 10b5:8518 - Bridge device > 07:02.0 - 10b5:8518 - Bridge device > 06:00.0 - 10b5:8518 - Bridge device > 02:03.0 - 10b5:8518 - Bridge device > 01:00.0 - 10b5:8518 - Bridge device > PCIE1: Bus 00 - 0b > PCIE2: connected as Root Complex > 0d:00.0 - 1957:0040 - Processor > PCIE2: Bus 0c - 0d > > Signed-off-by: Peter Tyser > --- > common/cmd_pci.c | 66 +----------------------------- > drivers/pci/pci.c | 117 ++++++++++++++++++++++++++++++++++++++++------------- > include/pci.h | 1 + > 3 files changed, 92 insertions(+), 92 deletions(-) Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de What is mind? No matter. What is matter? Never mind. -- Thomas Hewitt Key, 1799-1875