From: Wolfgang Denk Date: Sun, 21 Nov 2010 20:17:01 +0100 Subject: [U-Boot] arch/powerpc/cpu/ppc4xx/start.S: comment makes little sense Message-ID: <20101121191701.DFCF1678@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Stefan, I think this comment in arch/powerpc/cpu/ppc4xx/start.S needs a bit of cleanup: 51 /* U-Boot - Startup Code for AMCC 4xx PowerPC based Embedded Boards 52 * 53 * 54 * The processor starts at 0xfffffffc and the code is executed 55 * from flash/rom. 56 * in memory, but as long we don't jump around before relocating. 57 * board_init lies at a quite high address and when the cpu has 58 * jumped there, everything is ok. 59 * This works because the cpu gives the FLASH (CS0) the whole 60 * address space at startup, and board_init lies as a echo of 61 * the flash somewhere up there in the memorymap. 62 * 63 * board_init will change CS0 to be positioned at the correct 64 * address and (s)dram will be positioned at address 0 65 */ All this makes pretty little sense to me. Thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de There are some things worth dying for. -- Kirk, "Errand of Mercy", stardate 3201.7