From: Pavel Machek Date: Fri, 26 Nov 2010 09:31:25 +0100 Subject: [ath9k-devel] ath9k_htc vs. powerpc (was Re: working usb wifi card, that is still possible to buy) In-Reply-To: <4CED33E0.5040000@lwfinger.net> References: <20101103092431.GA21138@pma.sysgo.com> <20101124081616.GA30595@pma.sysgo.com> <20101124131320.GA2611@pma.sysgo.com> <4CED33E0.5040000@lwfinger.net> Message-ID: <20101126083125.GA28982@pma.sysgo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Hi! > > | D-Link DWA-131 | 07d1:3303 | realtek? | | > > This one should work with driver r8712u in staging in kernel 2.6.37-rcX. I don't > have this model for testing, but the DWA-130 is rock solid with that driver. Thanks... Yes, it works, but staging scares me. I found card compatible with ath9k_htc driver, that works well on PC, and is even listed as supported by atheros. Good. Unfortunately, it does not work that well on powerpc mpc5200b. (I'm using recent wireless-testing tree). I can do scan just fine, but can not actually asocciate with the accesspoint. Nothing too useful in dmesg, only: Freeing unused kernel memory: 176k init warning: `named' uses 32-bit capabilities (legacy support in use) process `named' is using obsolete setsockopt SO_BSDCOMPAT ieee80211 phy0: device now idle ieee80211 phy0: device no longer idle - scanning ieee80211 phy0: device now idle ieee80211 phy0: device no longer idle - scanning wlan0: direct probe to 00:23:f8:5d:76:93 (try 1) wlan0: direct probe to 00:23:f8:5d:76:93 (try 2) wlan0: direct probe to 00:23:f8:5d:76:93 (try 3) wlan0: direct probe to 00:23:f8:5d:76:93 timed out ieee80211 phy0: device now idle -/bin/sh-3.00# Any ideas how to get more verbose debugging? Diffences to the mpc5200b board are: a) it is PowerPC, thus big-endian board b) it only has USB1.1 controller. Pavel