From: u.kleine-koenig@pengutronix.de (Uwe =?iso-8859-1?Q?Kleine-K=F6nig?=) Date: Fri, 26 Nov 2010 21:07:46 +0100 Subject: [PATCH 28/51] ARM: mx25: dynamically allocate mxc-ehci devices In-Reply-To: <4CEFD139.8090600@gandalf.sssup.it> References: <20101117212821.GF8942@pengutronix.de> <1290029419-21435-28-git-send-email-u.kleine-koenig@pengutronix.de> <4CEFCC9A.2020500@fqingenieria.es> <4CEFD139.8090600@gandalf.sssup.it> Message-ID: <20101126200746.GB25293@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Michael, On Fri, Nov 26, 2010 at 04:24:41PM +0100, Michael Trimarchi wrote: > On 11/26/2010 04:04 PM, Jaume Ribot wrote: >> Dear Uwe, >> >> I think there is an error in the Freescale documentation, as new 0x200 offset (as it might be according reference manual) makes usbh2 stops working. >> >> Other users have experienced simmilar issues: >> http://forums.freescale.com/t5/i-MX-Microprocessors/i-MX25-USBOH-host-core-port-on-chip-serial-PHY-Control/m-p/59365 >> >> I think old 0x400 offset value were correct. >> Anyone can confirm? > I can say that I'm using the mainline (814ce2521121c2459e16cea8c7221e157edbeddd) without this patch and the usbhost work > on my mx25 board. And I assume applying the patch breaks USB for you? Uwe -- Pengutronix e.K. | Uwe Kleine-K?nig | Industrial Linux Solutions | http://www.pengutronix.de/ |